lkml.org 
[lkml]   [2022]   [Jun]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v5 00/18] Introduce Nuvoton Arbel NPCM8XX BMC SoC
    Date
    This patchset  adds initial support for the Nuvoton 
    Arbel NPCM8XX Board Management controller (BMC) SoC family.

    The Nuvoton Arbel NPCM8XX SoC is a fourth-generation BMC.
    The NPCM8XX computing subsystem comprises a quadcore ARM
    Cortex A35 ARM-V8 architecture.

    This patchset adds minimal architecture and drivers such as:
    Clocksource, Clock, Reset, and WD.

    Some of the Arbel NPCM8XX peripherals are based on Poleg NPCM7XX.

    This patchset was tested on the Arbel NPCM8XX evaluation board.

    Addressed comments from:
    - Krzysztof Kozlowski: https://www.spinics.net/lists/arm-kernel/msg990506.html

    Changes since version 4:
    - NPCM8XX clock driver
    - Use the same quote in the dt-binding file.

    Changes since version 3:
    - NPCM8XX clock driver
    - Rename NPCM8xx clock dt-binding header file.
    - Remove unused structures.
    - Improve Handling the clocks registration.
    - NPCM reset driver
    - Add ref phandle to dt-binding.

    Changes since version 2:
    - Remove NPCM8xx WDT compatible patch.
    - Remove NPCM8xx UART compatible patch.
    - NPCM8XX clock driver
    - Add debug new line.
    - Add 25M fixed rate clock.
    - Remove unused clocks and clock name from dt-binding.
    - NPCM reset driver
    - Revert to npcm7xx dt-binding.
    - Skip dt binding quotes.
    - Adding DTS backward compatibility.
    - Remove NPCM8xx binding include file.
    - Warp commit message.
    - NPCM8XX device tree:
    - Remove unused clock nodes (used in the clock driver)
    - Modify gcr and rst node names.

    Changes since version 1:
    - NPCM8XX clock driver
    - Modify dt-binding.
    - Remove unsed definition and include.
    - Include alphabetically.
    - Use clock devm.
    - NPCM reset driver
    - Modify dt-binding.
    - Modify syscon name.
    - Add syscon support to NPCM7XX dts reset node.
    - use data structure.
    - NPCM8XX device tree:
    - Modify evb compatible name.
    - Add NPCM7xx compatible.
    - Remove disable nodes from the EVB DTS.

    Tomer Maimon (18):
    dt-bindings: timer: npcm: Add npcm845 compatible string
    clocksource: timer-npcm7xx: Add NPCM845 timer support
    dt-bindings: serial: 8250: Add npcm845 compatible string
    dt-bindings: watchdog: npcm: Add npcm845 compatible string
    dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
    clk: npcm8xx: add clock controller
    dt-bindings: reset: npcm: add GCR syscon property
    ARM: dts: nuvoton: add reset syscon property
    reset: npcm: using syscon instead of device data
    dt-bindings: reset: npcm: Add support for NPCM8XX
    reset: npcm: Add NPCM8XX support
    dt-bindings: arm: npcm: Add maintainer
    dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
    dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
    arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC
    arm64: dts: nuvoton: Add initial NPCM8XX device tree
    arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
    arm64: defconfig: Add Nuvoton NPCM family support

    .../devicetree/bindings/arm/npcm/npcm.yaml | 7 +
    .../bindings/arm/npcm/nuvoton,gcr.yaml | 2 +
    .../bindings/clock/nuvoton,npcm845-clk.yaml | 49 ++
    .../bindings/reset/nuvoton,npcm750-reset.yaml | 10 +-
    .../devicetree/bindings/serial/8250.yaml | 1 +
    .../bindings/timer/nuvoton,npcm7xx-timer.yaml | 2 +
    .../bindings/watchdog/nuvoton,npcm-wdt.txt | 3 +-
    MAINTAINERS | 2 +
    arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi | 1 +
    arch/arm64/Kconfig.platforms | 11 +
    arch/arm64/boot/dts/Makefile | 1 +
    arch/arm64/boot/dts/nuvoton/Makefile | 2 +
    .../dts/nuvoton/nuvoton-common-npcm8xx.dtsi | 170 +++++
    .../boot/dts/nuvoton/nuvoton-npcm845-evb.dts | 30 +
    .../boot/dts/nuvoton/nuvoton-npcm845.dtsi | 76 +++
    arch/arm64/configs/defconfig | 3 +
    drivers/clk/Kconfig | 6 +
    drivers/clk/Makefile | 1 +
    drivers/clk/clk-npcm8xx.c | 594 ++++++++++++++++++
    drivers/clocksource/timer-npcm7xx.c | 1 +
    drivers/reset/reset-npcm.c | 206 +++++-
    .../dt-bindings/clock/nuvoton,npcm845-clk.h | 49 ++
    22 files changed, 1191 insertions(+), 36 deletions(-)
    create mode 100644 Documentation/devicetree/bindings/clock/nuvoton,npcm845-clk.yaml
    create mode 100644 arch/arm64/boot/dts/nuvoton/Makefile
    create mode 100644 arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi
    create mode 100644 arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
    create mode 100644 arch/arm64/boot/dts/nuvoton/nuvoton-npcm845.dtsi
    create mode 100644 drivers/clk/clk-npcm8xx.c
    create mode 100644 include/dt-bindings/clock/nuvoton,npcm845-clk.h

    --
    2.33.0

    \
     
     \ /
      Last update: 2022-06-22 15:24    [W:3.000 / U:0.956 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site