lkml.org 
[lkml]   [2022]   [May]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] dt-bindings: phy: ti: phy-gmii-sel: Add bindings for J7200
Date
TI's J7200 SoC supports additional PHY modes like QSGMII and SGMII
that are not supported on earlier SoCs. Add a compatible for it.

Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
---
.../mfd/ti,j721e-system-controller.yaml | 5 ++++
.../bindings/phy/ti,phy-gmii-sel.yaml | 24 ++++++++++++++++++-
2 files changed, 28 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
index fa86691ebf16..e381ba62a513 100644
--- a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
+++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
@@ -48,6 +48,11 @@ patternProperties:
description:
This is the SERDES lane control mux.

+ "phy@[0-9a-f]+$":
+ type: object
+ description:
+ This is the register to set phy mode through phy-gmii-sel driver.
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml b/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml
index ff8a6d9eb153..7427758451e7 100644
--- a/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml
+++ b/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml
@@ -53,12 +53,21 @@ properties:
- ti,am43xx-phy-gmii-sel
- ti,dm814-phy-gmii-sel
- ti,am654-phy-gmii-sel
+ - ti,j7200-cpsw5g-phy-gmii-sel

reg:
maxItems: 1

'#phy-cells': true

+ ti,enet-ctrl-qsgmii:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Required only for QSGMII mode. Bitmask to select the port for
+ QSGMII main mode. Rest of the ports are selected as QSGMII_SUB
+ ports automatically. Any of the 4 CPSW5G ports can act as the
+ main port with the rest of them being the QSGMII_SUB ports.
+
allOf:
- if:
properties:
@@ -73,6 +82,19 @@ allOf:
'#phy-cells':
const: 1
description: CPSW port number (starting from 1)
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ti,j7200-cpsw5g-phy-gmii-sel
+ then:
+ properties:
+ '#phy-cells':
+ const: 1
+ description: CPSW port number (starting from 1)
+ ti,enet-ctrl-qsgmii:
+ enum: [1, 2, 4, 8]
- if:
properties:
compatible:
@@ -97,7 +119,7 @@ additionalProperties: false

examples:
- |
- phy_gmii_sel: phy-gmii-sel@650 {
+ phy_gmii_sel: phy@650 {
compatible = "ti,am3352-phy-gmii-sel";
reg = <0x650 0x4>;
#phy-cells = <2>;
--
2.36.1
\
 
 \ /
  Last update: 2022-05-31 13:14    [W:0.120 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site