lkml.org 
[lkml]   [2022]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 23/26] dmaengine: dw-edma: Bypass dma-ranges mapping for the local setup
On Tue, May 24, 2022 at 06:49:59PM +0530, Manivannan Sadhasivam wrote:
> On Wed, May 04, 2022 at 01:51:01AM +0300, Serge Semin wrote:
> > DW eDMA doesn't perform any translation of the traffic generated on the
> > CPU/Application side. It just generates read/write AXI-bus requests with
> > the specified addresses. But in case if the dma-ranges DT-property is
> > specified for a platform device node, Linux will use it to map the CPU
> > memory regions into the DMAable bus ranges. This isn't what we want for
> > the eDMA embedded into the locally accessed DW PCIe Root Port and
> > End-point. In order to work that around let's set the chan_dma_dev flag
> > for each DW eDMA channel thus forcing the client drivers to getting a
> > custom dma-ranges-less parental device for the mappings.
> >
> > Note it will only work for the client drivers using the
> > dmaengine_get_dma_device() method to get the parental DMA device.
> >
> > Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> > Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> >
> > ---
> >
> > Changelog v2:
> > - Fix the comment a bit to being clearer. (@Manivannan)
> > ---
> > drivers/dma/dw-edma/dw-edma-core.c | 15 +++++++++++++++
> > 1 file changed, 15 insertions(+)
> >
> > diff --git a/drivers/dma/dw-edma/dw-edma-core.c b/drivers/dma/dw-edma/dw-edma-core.c
> > index 6a8282eaebaf..908607785401 100644
> > --- a/drivers/dma/dw-edma/dw-edma-core.c
> > +++ b/drivers/dma/dw-edma/dw-edma-core.c
> > @@ -716,6 +716,21 @@ static int dw_edma_alloc_chan_resources(struct dma_chan *dchan)
> > if (chan->status != EDMA_ST_IDLE)
> > return -EBUSY;
> >
> > + /* Bypass the dma-ranges based memory regions mapping for the eDMA
> > + * controlled from the CPU/Application side since in that case
> > + * the local memory address is left untranslated.
> > + */
> > + if (chan->dw->chip->flags & DW_EDMA_CHIP_LOCAL) {
> > + dchan->dev->chan_dma_dev = true;
> > +
> > + dchan->dev->device.dma_coherent = chan->dw->chip->dev->dma_coherent;
>

> I happen to test this series on Qcom ARM32 machine and it errors out during the
> compilation due to "dma_coherent" not available on !SWIOTLB ARM32 configs.

Nice catch! Thanks. I'll fix it in the next patchset version.

-Sergey

>
> Thanks,
> Mani
>
> > + dma_coerce_mask_and_coherent(&dchan->dev->device,
> > + dma_get_mask(chan->dw->chip->dev));
> > + dchan->dev->device.dma_parms = chan->dw->chip->dev->dma_parms;
> > + } else {
> > + dchan->dev->chan_dma_dev = false;
> > + }
> > +
> > pm_runtime_get(chan->dw->chip->dev);
> >
> > return 0;
> > --
> > 2.35.1
> >
>
> --
> மணிவண்ணன் சதாசிவம்

\
 
 \ /
  Last update: 2022-05-25 10:59    [W:0.080 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site