lkml.org 
[lkml]   [2022]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/2] hwmon: acpi_power_meter: convert to hwmon_device_register_with_info
Le Wed, May 11, 2022 at 07:10:29PM -0700, Guenter Roeck a écrit :
> Corentin,
>
> On 5/8/22 23:30, Corentin Labbe wrote:
> > Booting lead to a hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
> > So let's convert the driver to use hwmon_device_register_with_info().
> >
> > Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
> > ---
> [ ... ]
>
> > @@ -836,20 +740,20 @@ static void acpi_power_meter_notify(struct acpi_device *device, u32 event)
> > if (res)
> > break;
> >
> > - remove_attrs(resource);
> > + remove_domain_devices(resource);
> > setup_attrs(resource);
>
> Zhang Rui found an interesting problem with this code:
> It needs a call to sysfs_update_groups(hwmon_dev->groups)
> to update sysfs attribute visibility, probably between
> remove_domain_devices() and setup_attrs().
>
> > break;
> > case METER_NOTIFY_TRIP:
> > - sysfs_notify(&device->dev.kobj, NULL, POWER_AVERAGE_NAME);
> > + hwmon_notify_event(&device->dev, hwmon_power, hwmon_power_average, 0);
>
> ... which makes realize: The notification device should be the hwmon device.
> That would be resource->hwmon_dev, not the acpi device.
>

Hello

Since my hardware lacks capabilities testing this, I have emulated it on qemu:
https://github.com/montjoie/qemu/commit/320f2ddacb954ab308ef699f66fca6313f75bc2b

I have added a custom ACPI _DBX method for triggering some ACPI state change. (like config change, like enabling CAP).

For testing config change I have tried lot of way:
res = read_capabilities(resource);
@@ -742,18 +758,22 @@ static void acpi_power_meter_notify(struct acpi_device *device, u32 event)

remove_domain_devices(resource);
setup_attrs(resource);
+ res = sysfs_update_groups(&resource->hwmon_dev->kobj, acpi_power_groups);
+ res = sysfs_update_groups(&resource->acpi_dev->dev.kobj, acpi_power_groups);
+ res = hwmon_notify_event(resource->hwmon_dev, hwmon_power, hwmon_power_cap, 0);
+ res = hwmon_notify_event(resource->hwmon_dev, hwmon_power, hwmon_power_average, 0);
break;
case METER_NOTIFY_TRIP:
- hwmon_notify_event(&device->dev, hwmon_power, hwmon_power_average, 0);
+ res = hwmon_notify_event(resource->hwmon_dev, hwmon_power, hwmon_power_average, 0);
break;
case METER_NOTIFY_CAP:
- hwmon_notify_event(&device->dev, hwmon_power, hwmon_power_cap, 0);
+ res = hwmon_notify_event(resource->hwmon_dev, hwmon_power, hwmon_power_cap, 0);
break;
case METER_NOTIFY_INTERVAL:
- hwmon_notify_event(&device->dev, hwmon_power, hwmon_power_average_interval, 0);
+ res = hwmon_notify_event(resource->hwmon_dev, hwmon_power, hwmon_power_average_interval, 0);
break;
case METER_NOTIFY_CAPPING:
- hwmon_notify_event(&device->dev, hwmon_power, hwmon_power_alarm, 0);
+ res = hwmon_notify_event(resource->hwmon_dev, hwmon_power, hwmon_power_alarm, 0);
dev_info(&device->dev, "Capping in progress.\n");
break;
default:

But nothing force visibility to be rerun.

Any idea on how to force visibility to be re-run ?

\
 
 \ /
  Last update: 2022-05-15 21:37    [W:0.094 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site