lkml.org 
[lkml]   [2022]   [May]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 3/3] dt-bindings: usb: add documentation for aspeed udc
Date
> -----Original Message-----
> From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Sent: Friday, May 13, 2022 5:07 PM
> To: Neal Liu <neal_liu@aspeedtech.com>; Greg Kroah-Hartman
> <gregkh@linuxfoundation.org>; Rob Herring <robh+dt@kernel.org>;
> Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>; Joel Stanley
> <joel@jms.id.au>; Andrew Jeffery <andrew@aj.id.au>; Felipe Balbi
> <balbi@kernel.org>; Sumit Semwal <sumit.semwal@linaro.org>; Christian
> König <christian.koenig@amd.com>; Geert Uytterhoeven <geert@linux-
> m68k.org>; Li Yang <leoyang.li@nxp.com>
> Cc: linux-aspeed@lists.ozlabs.org; linux-usb@vger.kernel.org;
> devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-
> kernel@vger.kernel.org; linux-media@vger.kernel.org; dri-
> devel@lists.freedesktop.org; linaro-mm-sig@lists.linaro.org; BMC-SW <BMC-
> SW@aspeedtech.com>
> Subject: Re: [PATCH 3/3] dt-bindings: usb: add documentation for aspeed
> udc
>
> On 13/05/2022 08:57, Neal Liu wrote:
> > Add device tree binding documentation for the Aspeed USB2.0 Device
> > Controller.
> >
> > Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
> > ---
> > .../devicetree/bindings/usb/aspeed,udc.yaml | 52
> +++++++++++++++++++
> > 1 file changed, 52 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/usb/aspeed,udc.yaml
>
> Please name the file as first compatible, so "aspeed,ast2600-udc.yaml"

Okay, I could rename it for next patch if you preferred.
But there are lots of yaml files which are not named as first compatible.

>
> >
> > diff --git a/Documentation/devicetree/bindings/usb/aspeed,udc.yaml
> > b/Documentation/devicetree/bindings/usb/aspeed,udc.yaml
> > new file mode 100644
> > index 000000000000..d1d2f77d1c54
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/usb/aspeed,udc.yaml
> > @@ -0,0 +1,52 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) # Copyright
> > +(c) 2020 Facebook Inc.
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/usb/aspeed,udc.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: ASPEED USB 2.0 Device Controller
> > +
> > +maintainers:
> > + - Neal Liu <neal_liu@aspeedtech.com>
> > +
> > +description: |+
> > + The ASPEED USB 2.0 Device Controller implements 1 control endpoint
> > +and
> > + 4 generic endpoints for AST260x.
> > +
> > + Supports independent DMA channel for each generic endpoint.
> > + Supports 32/256 stages descriptor mode for all generic endpoints.
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - aspeed,ast2600-udc
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + clocks:
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 1
>
> No child properties? No ports or any other devices? No usb-hcd.yaml?

Aspeed udc only has 1 port, no need extra properties for now.

> > +
> > +required:
> > + - compatible
> > + - reg
> > + - clocks
> > + - interrupts
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/clock/aspeed-clock.h>
> > + udc: udc@1e6a2000 {
>
> Node name: usb

"udc" is more recognizable than "usb" I think. "usb" is too general, can be various like host or device.

>
> > + compatible = "aspeed,ast2600-udc";
> > + reg = <0x1e6a2000 0x300>;
> > + interrupts = <9>;
> > + clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_usb2bd_default>;
> > + };
>
>
> Best regards,
> Krzysztof
\
 
 \ /
  Last update: 2022-05-13 17:41    [W:0.099 / U:0.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site