lkml.org 
[lkml]   [2022]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/4] platform/x86: simatic-ipc: drop custom P2SB bar code
Date
The two drivers that used to use this have been switched over to the
common P2SB accessor, so this code is not needed any longer.

Signed-off-by: Henning Schild <henning.schild@siemens.com>
---
drivers/platform/x86/simatic-ipc.c | 38 -------------------
.../platform_data/x86/simatic-ipc-base.h | 2 -
2 files changed, 40 deletions(-)

diff --git a/drivers/platform/x86/simatic-ipc.c b/drivers/platform/x86/simatic-ipc.c
index b599cda5ba3c..26c35e1660cb 100644
--- a/drivers/platform/x86/simatic-ipc.c
+++ b/drivers/platform/x86/simatic-ipc.c
@@ -101,44 +101,6 @@ static int register_platform_devices(u32 station_id)
return 0;
}

-/* FIXME: this should eventually be done with generic P2SB discovery code
- * the individual drivers for watchdogs and LEDs access memory that implements
- * GPIO, but pinctrl will not come up because of missing ACPI entries
- *
- * While there is no conflict a cleaner solution would be to somehow bring up
- * pinctrl even with these ACPI entries missing, and base the drivers on pinctrl.
- * After which the following function could be dropped, together with the code
- * poking the memory.
- */
-/*
- * Get membase address from PCI, used in leds and wdt module. Here we read
- * the bar0. The final address calculation is done in the appropriate modules
- */
-u32 simatic_ipc_get_membase0(unsigned int p2sb)
-{
- struct pci_bus *bus;
- u32 bar0 = 0;
- /*
- * The GPIO memory is in bar0 of the hidden P2SB device.
- * Unhide the device to have a quick look at it, before we hide it
- * again.
- * Also grab the pci rescan lock so that device does not get discovered
- * and remapped while it is visible.
- * This code is inspired by drivers/mfd/lpc_ich.c
- */
- bus = pci_find_bus(0, 0);
- pci_lock_rescan_remove();
- pci_bus_write_config_byte(bus, p2sb, 0xE1, 0x0);
- pci_bus_read_config_dword(bus, p2sb, PCI_BASE_ADDRESS_0, &bar0);
-
- bar0 &= ~0xf;
- pci_bus_write_config_byte(bus, p2sb, 0xE1, 0x1);
- pci_unlock_rescan_remove();
-
- return bar0;
-}
-EXPORT_SYMBOL(simatic_ipc_get_membase0);
-
static int __init simatic_ipc_init_module(void)
{
const struct dmi_system_id *match;
diff --git a/include/linux/platform_data/x86/simatic-ipc-base.h b/include/linux/platform_data/x86/simatic-ipc-base.h
index 62d2bc774067..39fefd48cf4d 100644
--- a/include/linux/platform_data/x86/simatic-ipc-base.h
+++ b/include/linux/platform_data/x86/simatic-ipc-base.h
@@ -24,6 +24,4 @@ struct simatic_ipc_platform {
u8 devmode;
};

-u32 simatic_ipc_get_membase0(unsigned int p2sb);
-
#endif /* __PLATFORM_DATA_X86_SIMATIC_IPC_BASE_H */
--
2.35.1
\
 
 \ /
  Last update: 2022-05-11 17:40    [W:0.113 / U:0.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site