lkml.org 
[lkml]   [2022]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] hwmon: (dell-smm) Add cooling device support
From
Date
Am 30.03.22 um 18:33 schrieb Armin Wolf:

> Until now, only the temperature sensors where exported thru
> the thermal subsystem. Export the fans as "dell-smm-fan[1-3]" too
> to make them available as cooling devices.
> Also update Documentation.
>
> Signed-off-by: Armin Wolf <W_Armin@gmx.de>
> ---
> Documentation/hwmon/dell-smm-hwmon.rst | 7 ++
> drivers/hwmon/Kconfig | 1 +
> drivers/hwmon/dell-smm-hwmon.c | 94 +++++++++++++++++++++++++-
> 3 files changed, 99 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/hwmon/dell-smm-hwmon.rst b/Documentation/hwmon/dell-smm-hwmon.rst
> index d3323a96665d..41839b7de2c1 100644
> --- a/Documentation/hwmon/dell-smm-hwmon.rst
> +++ b/Documentation/hwmon/dell-smm-hwmon.rst
> @@ -86,6 +86,13 @@ probe the BIOS on your machine and discover the appropriate codes.
>
> Again, when you find new codes, we'd be happy to have your patches!
>
> +``thermal`` interface
> +---------------------------
> +
> +The driver also exports the fans as thermal cooling devices with
> +``type`` set to ``dell-smm-fan[1-3]``. This allows for easy fan control
> +using one of the thermal governors.
> +
> Module parameters
> -----------------
>
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 9ab4e9b3d27b..1175b8e38c45 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -498,6 +498,7 @@ config SENSORS_DS1621
> config SENSORS_DELL_SMM
> tristate "Dell laptop SMM BIOS hwmon driver"
> depends on X86
> + imply THERMAL
> help
> This hwmon driver adds support for reporting temperature of different
> sensors and controls the fans on Dell laptops via System Management
> diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c
> index 84cb1ede7bc0..0c29386f4bd3 100644
> --- a/drivers/hwmon/dell-smm-hwmon.c
> +++ b/drivers/hwmon/dell-smm-hwmon.c
> @@ -21,6 +21,7 @@
> #include <linux/errno.h>
> #include <linux/hwmon.h>
> #include <linux/init.h>
> +#include <linux/kconfig.h>
> #include <linux/kernel.h>
> #include <linux/module.h>
> #include <linux/mutex.h>
> @@ -29,6 +30,7 @@
> #include <linux/seq_file.h>
> #include <linux/string.h>
> #include <linux/smp.h>
> +#include <linux/thermal.h>
> #include <linux/types.h>
> #include <linux/uaccess.h>
>
> @@ -80,6 +82,11 @@ struct dell_smm_data {
> int *fan_nominal_speed[DELL_SMM_NO_FANS];
> };
>
> +struct dell_smm_cooling_data {
> + u8 fan_num;
> + struct dell_smm_data *data;
> +};
> +
> MODULE_AUTHOR("Massimo Dal Zotto (dz@debian.org)");
> MODULE_AUTHOR("Pali Rohár <pali@kernel.org>");
> MODULE_DESCRIPTION("Dell laptop SMM BIOS hwmon driver");
> @@ -638,9 +645,50 @@ static void __init i8k_init_procfs(struct device *dev)
>
> #endif
>
> -/*
> - * Hwmon interface
> - */
> +static int dell_smm_get_max_state(struct thermal_cooling_device *dev, unsigned long *state)
> +{
> + struct dell_smm_cooling_data *cdata = dev->devdata;
> +
> + *state = cdata->data->i8k_fan_max;
> +
> + return 0;
> +}
> +
> +static int dell_smm_get_cur_state(struct thermal_cooling_device *dev, unsigned long *state)
> +{
> + struct dell_smm_cooling_data *cdata = dev->devdata;
> + int ret;
> +
> + ret = i8k_get_fan_status(cdata->data, cdata->fan_num);
> + if (ret < 0)
> + return ret;
> +
> + *state = ret;
> +
> + return 0;
> +}
> +
> +static int dell_smm_set_cur_state(struct thermal_cooling_device *dev, unsigned long state)
> +{
> + struct dell_smm_cooling_data *cdata = dev->devdata;
> + struct dell_smm_data *data = cdata->data;
> + int ret;
> +
> + if (state > data->i8k_fan_max)
> + return -EINVAL;
> +
> + mutex_lock(&data->i8k_mutex);
> + ret = i8k_set_fan(data, cdata->fan_num, (int)state);
> + mutex_unlock(&data->i8k_mutex);
> +
> + return ret;
> +}
> +
> +static const struct thermal_cooling_device_ops dell_smm_cooling_ops = {
> + .get_max_state = dell_smm_get_max_state,
> + .get_cur_state = dell_smm_get_cur_state,
> + .set_cur_state = dell_smm_set_cur_state,
> +};
>
> static umode_t dell_smm_is_visible(const void *drvdata, enum hwmon_sensor_types type, u32 attr,
> int channel)
> @@ -941,6 +989,37 @@ static const struct hwmon_chip_info dell_smm_chip_info = {
> .info = dell_smm_info,
> };
>
> +static int __init dell_smm_init_cdev(struct device *dev, u8 fan_num)
> +{
> + struct dell_smm_data *data = dev_get_drvdata(dev);
> + struct thermal_cooling_device *cdev;
> + struct dell_smm_cooling_data *cdata;
> + int ret = 0;
> + char *name;
> +
> + name = kasprintf(GFP_KERNEL, "dell-smm-fan%u", fan_num + 1);
> + if (!name)
> + return -ENOMEM;
> +
> + cdata = devm_kmalloc(dev, sizeof(*cdata), GFP_KERNEL);
> + if (cdata) {
> + cdata->fan_num = fan_num;
> + cdata->data = data;
> + cdev = devm_thermal_of_cooling_device_register(dev, NULL, name, cdata,
> + &dell_smm_cooling_ops);
> + if (IS_ERR(cdev)) {
> + devm_kfree(dev, cdata);
> + ret = PTR_ERR(cdev);
> + }
> + } else {
> + ret = -ENOMEM;
> + }
> +
> + kfree(name);
> +
> + return ret;
> +}
> +
> static int __init dell_smm_init_hwmon(struct device *dev)
> {
> struct dell_smm_data *data = dev_get_drvdata(dev);
> @@ -967,6 +1046,15 @@ static int __init dell_smm_init_hwmon(struct device *dev)
> continue;
>
> data->fan[i] = true;
> +
> + /* the cooling device it not critical, ignore failures */
> + if (IS_REACHABLE(CONFIG_THERMAL)) {
> + err = dell_smm_init_cdev(dev, i);
> + if (err < 0)
> + dev_err(dev, "Failed to register cooling device for fan %u\n",
> + i + 1);
> + }
> +
> data->fan_nominal_speed[i] = devm_kmalloc_array(dev, data->i8k_fan_max + 1,
> sizeof(*data->fan_nominal_speed[i]),
> GFP_KERNEL);
> --
> 2.30.2
>
Any thoughts on this? I tested it on a Dell Inspiron 3505, so i can prove it works.

\
 
 \ /
  Last update: 2022-04-09 17:37    [W:1.378 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site