lkml.org 
[lkml]   [2022]   [Apr]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 15/15] cpufreq: mediatek: Use device print to show logs
Date
Replace pr_* with dev_* to show logs.

Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
---
drivers/cpufreq/mediatek-cpufreq.c | 41 +++++++++++++++++-------------
1 file changed, 23 insertions(+), 18 deletions(-)

diff --git a/drivers/cpufreq/mediatek-cpufreq.c b/drivers/cpufreq/mediatek-cpufreq.c
index 07d3b31e3ee0..34e3baa4927f 100644
--- a/drivers/cpufreq/mediatek-cpufreq.c
+++ b/drivers/cpufreq/mediatek-cpufreq.c
@@ -92,13 +92,15 @@ static int mtk_cpufreq_voltage_tracking(struct mtk_cpu_dvfs_info *info,

old_vproc = regulator_get_voltage(proc_reg);
if (old_vproc < 0) {
- pr_err("%s: invalid Vproc value: %d\n", __func__, old_vproc);
+ dev_err(info->cpu_dev,
+ "%s: invalid Vproc value: %d\n", __func__, old_vproc);
return old_vproc;
}

old_vsram = regulator_get_voltage(sram_reg);
if (old_vsram < 0) {
- pr_err("%s: invalid Vsram value: %d\n", __func__, old_vsram);
+ dev_err(info->cpu_dev,
+ "%s: invalid Vsram value: %d\n", __func__, old_vsram);
return old_vsram;
}

@@ -217,8 +219,8 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
freq_hz = freq_table[index].frequency * 1000;
opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_hz);
if (IS_ERR(opp)) {
- pr_err("cpu%d: failed to find OPP for %ld\n",
- policy->cpu, freq_hz);
+ dev_err(cpu_dev, "cpu%d: failed to find OPP for %ld\n",
+ policy->cpu, freq_hz);
return PTR_ERR(opp);
}
vproc = dev_pm_opp_get_voltage(opp);
@@ -243,8 +245,8 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
if (old_vproc <= target_vproc) {
ret = mtk_cpufreq_set_voltage(info, target_vproc);
if (ret) {
- pr_err("cpu%d: failed to scale up voltage!\n",
- policy->cpu);
+ dev_err(cpu_dev, "cpu%d: failed to scale up voltage!\n",
+ policy->cpu);
mtk_cpufreq_set_voltage(info, old_vproc);
goto out;
}
@@ -253,8 +255,8 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
/* Reparent the CPU clock to intermediate clock. */
ret = clk_set_parent(cpu_clk, info->inter_clk);
if (ret) {
- pr_err("cpu%d: failed to re-parent cpu clock!\n",
- policy->cpu);
+ dev_err(cpu_dev, "cpu%d: failed to re-parent cpu clock!\n",
+ policy->cpu);
mtk_cpufreq_set_voltage(info, old_vproc);
goto out;
}
@@ -262,8 +264,8 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
/* Set the original PLL to target rate. */
ret = clk_set_rate(armpll, freq_hz);
if (ret) {
- pr_err("cpu%d: failed to scale cpu clock rate!\n",
- policy->cpu);
+ dev_err(cpu_dev, "cpu%d: failed to scale cpu clock rate!\n",
+ policy->cpu);
clk_set_parent(cpu_clk, armpll);
mtk_cpufreq_set_voltage(info, old_vproc);
goto out;
@@ -272,8 +274,8 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
/* Set parent of CPU clock back to the original PLL. */
ret = clk_set_parent(cpu_clk, armpll);
if (ret) {
- pr_err("cpu%d: failed to re-parent cpu clock!\n",
- policy->cpu);
+ dev_err(cpu_dev, "cpu%d: failed to re-parent cpu clock!\n",
+ policy->cpu);
mtk_cpufreq_set_voltage(info, inter_vproc);
goto out;
}
@@ -285,8 +287,9 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
if (vproc < inter_vproc || vproc < old_vproc) {
ret = mtk_cpufreq_set_voltage(info, vproc);
if (ret) {
- pr_err("cpu%d: failed to scale down voltage!\n",
- policy->cpu);
+ dev_err(cpu_dev,
+ "cpu%d: failed to scale down voltage!\n",
+ policy->cpu);
clk_set_parent(cpu_clk, info->inter_clk);
clk_set_rate(armpll, old_freq_hz);
clk_set_parent(cpu_clk, armpll);
@@ -568,15 +571,17 @@ static int mtk_cpufreq_init(struct cpufreq_policy *policy)

info = mtk_cpu_dvfs_info_lookup(policy->cpu);
if (!info) {
- pr_err("dvfs info for cpu%d is not initialized.\n",
- policy->cpu);
+ dev_err(info->cpu_dev,
+ "dvfs info for cpu%d is not initialized.\n",
+ policy->cpu);
return -EINVAL;
}

ret = dev_pm_opp_init_cpufreq_table(info->cpu_dev, &freq_table);
if (ret) {
- pr_err("failed to init cpufreq table for cpu%d: %d\n",
- policy->cpu, ret);
+ dev_err(info->cpu_dev,
+ "failed to init cpufreq table for cpu%d: %d\n",
+ policy->cpu, ret);
return ret;
}

--
2.18.0
\
 
 \ /
  Last update: 2022-04-08 07:01    [W:1.068 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site