Messages in this thread | | | Date | Fri, 8 Apr 2022 14:20:49 +0200 | Subject | Re: [PATCH v2 2/5] drm: bridge: dw_hdmi: default enable workaround to clear the overflow | From | Neil Armstrong <> |
| |
On 08/04/2022 12:32, Sandor Yu wrote: > i.MX8MPlus (v2.13a) has verified need the workaround to clear the > overflow with one iteration. > Only i.MX6Q(v1.30a) need the workaround with 4 iterations, > the others versions later than v1.3a have been identified as needing > the workaround with a single iteration. > > Default enable the workaround with one iteration for all versions > later than v1.30a. > > Signed-off-by: Sandor Yu <Sandor.yu@nxp.com> > --- > drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 23 +++++++---------------- > 1 file changed, 7 insertions(+), 16 deletions(-) > > diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c > index 4befc104d220..02d8f7e08814 100644 > --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c > +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c > @@ -2086,30 +2086,21 @@ static void dw_hdmi_clear_overflow(struct dw_hdmi *hdmi) > * then write one of the FC registers several times. > * > * The number of iterations matters and depends on the HDMI TX revision > - * (and possibly on the platform). So far i.MX6Q (v1.30a), i.MX6DL > - * (v1.31a) and multiple Allwinner SoCs (v1.32a) have been identified > - * as needing the workaround, with 4 iterations for v1.30a and 1 > - * iteration for others. > - * The Amlogic Meson GX SoCs (v2.01a) have been identified as needing > - * the workaround with a single iteration. > - * The Rockchip RK3288 SoC (v2.00a) and RK3328/RK3399 SoCs (v2.11a) have > - * been identified as needing the workaround with a single iteration. > + * (and possibly on the platform). > + * 4 iterations for i.MX6Q(v1.30a) and 1 iteration for others. > + * i.MX6DL (v1.31a), Allwinner SoCs (v1.32a), Rockchip RK3288 SoC (v2.00a), > + * Amlogic Meson GX SoCs (v2.01a), RK3328/RK3399 SoCs (v2.11a) > + * and i.MX8MPlus (v2.13a) have been identified as needing the workaround > + * with a single iteration. > */ > > switch (hdmi->version) { > case 0x130a: > count = 4; > break; > - case 0x131a: > - case 0x132a: > - case 0x200a: > - case 0x201a: > - case 0x211a: > - case 0x212a: > + default: > count = 1; > break; > - default: > - return; > } > > /* TMDS software reset */
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
| |