lkml.org 
[lkml]   [2022]   [Apr]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] PCI: qcom: Fix pipe clock imbalance
On Fri 01 Apr 06:33 PDT 2022, Johan Hovold wrote:

> Commit ed8cc3b1fc84 ("PCI: qcom: Add support for SDM845 PCIe
> controller") introduced a clock imbalance by enabling the pipe clock
> both in init() and in post_init() but only disabling in post_deinit().
>
> Note that the pipe clock was also never disabled in the init() error
> paths and that enabling the clock before powering up the PHY looks
> questionable.
>
> Fixes: ed8cc3b1fc84 ("PCI: qcom: Add support for SDM845 PCIe controller")
> Cc: stable@vger.kernel.org # 5.6
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
>
> Changes in v2
> - Capitalise "Fix" in subject line according to PCI subsystem
> convention
>
>
> drivers/pci/controller/dwc/pcie-qcom.c | 6 ------
> 1 file changed, 6 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index b79d98e5e228..20a0e6533a1c 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -1238,12 +1238,6 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
> goto err_disable_clocks;
> }
>
> - ret = clk_prepare_enable(res->pipe_clk);
> - if (ret) {
> - dev_err(dev, "cannot prepare/enable pipe clock\n");
> - goto err_disable_clocks;
> - }
> -
> /* Wait for reset to complete, required on SM8450 */
> usleep_range(1000, 1500);
>
> --
> 2.35.1
>

\
 
 \ /
  Last update: 2022-04-04 15:52    [W:0.079 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site