lkml.org 
[lkml]   [2022]   [Apr]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 3/3] ASoC: sh: rz-ssi: Add a devres action to release the DMA channels
Date
Hi Lad Prabhakar,

Thanks for the patch.

> Subject: [PATCH 3/3] ASoC: sh: rz-ssi: Add a devres action to release the
> DMA channels
>
> DMA channels requested by rz_ssi_dma_request() in rz_ssi_probe() were never
> released in the error path apart from one place. This patch fixes this
> issue by adding a devres action to release the DMA channels and dropping
> the single rz_ssi_release_dma_channels() call which was placed in the error
> path in case devm_snd_soc_register_component() failed.
>
> Fixes: 26ac471c5354 ("ASoC: sh: rz-ssi: Add SSI DMAC support")
> Reported-by: Pavel Machek <pavel@denx.de>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> sound/soc/sh/rz-ssi.c | 12 ++++++++++--
> 1 file changed, 10 insertions(+), 2 deletions(-)
>
> diff --git a/sound/soc/sh/rz-ssi.c b/sound/soc/sh/rz-ssi.c index
> d9a684e71ec3..f04da1bf5680 100644
> --- a/sound/soc/sh/rz-ssi.c
> +++ b/sound/soc/sh/rz-ssi.c
> @@ -912,6 +912,11 @@ static const struct snd_soc_component_driver
> rz_ssi_soc_component = {
> .pcm_construct = rz_ssi_pcm_new,
> };
>
> +static void rz_ssi_release_dma_channels_action(void *data) {
> + rz_ssi_release_dma_channels(data);
> +}
> +
> static int rz_ssi_probe(struct platform_device *pdev) {
> struct rz_ssi_priv *ssi;
> @@ -966,6 +971,11 @@ static int rz_ssi_probe(struct platform_device *pdev)
> dev_info(&pdev->dev, "DMA enabled");
> ssi->playback.transfer = rz_ssi_dma_transfer;
> ssi->capture.transfer = rz_ssi_dma_transfer;
> +
> + ret = devm_add_action_or_reset(&pdev->dev,
> + rz_ssi_release_dma_channels_action,
> ssi);
> + if (ret)
> + return ret;
> }
>
> ssi->playback.priv = ssi;
> @@ -1027,8 +1037,6 @@ static int rz_ssi_probe(struct platform_device *pdev)
> rz_ssi_soc_dai,
> ARRAY_SIZE(rz_ssi_soc_dai));
> if (ret < 0) {
> - rz_ssi_release_dma_channels(ssi);
> -

Maybe we need to keep this as it is, otherwise DMA channel release will happen
after CLK disable and Reset assert. Ideally release the channel, disable the clock and assert
the reset.

Similarly, you may want to add "rz_ssi_release_dma_channels(ssi)" for error path related to
Pm_runtime_resume_get.


Also with this change there is unbalanced release_dma_channels() one from devres and other from remove.

Regards,
Biju



> pm_runtime_put(ssi->dev);
> pm_runtime_disable(ssi->dev);
> reset_control_assert(ssi->rstc);
> --
> 2.17.1

\
 
 \ /
  Last update: 2022-04-22 08:53    [W:0.060 / U:0.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site