lkml.org 
[lkml]   [2022]   [Apr]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
SubjectRe: [PATCH v3] RISC-V: Increase range and default value of NR_CPUS
On Thu, Apr 21, 2022 at 12:05 AM Heinrich Schuchardt
<heinrich.schuchardt@canonical.com> wrote:
>
>
>
> On 4/20/22 13:24, Anup Patel wrote:
> > Currently, the range and default value of NR_CPUS is too restrictive
> > for high-end RISC-V systems with large number of HARTs. The latest
> > QEMU virt machine supports upto 512 CPUs so the current NR_CPUS is
> > restrictive for QEMU as well. Other major architectures (such as
> > ARM64, x86_64, MIPS, etc) have a much higher range and default
> > value of NR_CPUS.
> >
> > This patch increases NR_CPUS range to 2-512 and default value to
> > XLEN (i.e. 32 for RV32 and 64 for RV64).
> >
> > Signed-off-by: Anup Patel <apatel@ventanamicro.com>
>

This works upto 207 harts in upstream Qemu + OpenSBI. Beyond that,
firmware size becomes > 2MB and PMP protection
kicks in for the kernel boot address (0x80200000)

Here is the OpenSBI boot prints for 256 harts with some hacks around
sanitize_domain to disable sbi_domain_check_addr

Platform Name : riscv-virtio,qemu
Platform Features : medeleg
Platform HART Count : 208
Platform IPI Device : aclint-mswi
Platform Timer Device : aclint-mtimer @ 10000000Hz
Platform Console Device : uart8250
Platform HSM Device : ---
Platform Reboot Device : sifive_test
Platform Shutdown Device : sifive_test
Firmware Base : 0x80000000
Firmware Size : 2052 KB ---------->>> Firmware size is
greater than 2MB where
Runtime SBI Version : 0.3

Domain0 Name : root
Domain0 Boot HART : 122
Domain0 HARTs :
0*,1*,2*,3*,4*,5*,6*,7*,8*,9*,10*,11*,12*,13*,14*,15*,16*,17*,18*,19*,20*,21*,22*,23*,24*,25*,26*,27*,28*,29*,30*,31*,32*,33*,34*,35*,36*,37*,38*,39*,40*,41*,42*,43*,44*,45*,46*,47*,48*,49*,50*,51*,52*,53*,54*,55*,56*,57*,58*,59*,60*,61*,62*,63*,64*,65*,66*,67*,68*,69*,70*,71*,72*,73*,74*,75*,76*,77*,78*,79*,80*,81*,82*,83*,84*,85*,86*,87*,88*,89*,90*,91*,92*,93*,94*,95*,96*,97*,98*,99*,100*,101*,102*,103*,104*,105*,106*,107*,108*,109*,110*,111*,112*,113*,114*,115*,116*,117*,118*,119*,120*,121*,122*,123*,124*,125*,126*,127*,128*,129*,130*,131*,132*,133*,134*,135*,136*,137*,138*,139*,140*,141*,142*,143*,144*,145*,146*,147*,148*,149*,150*,151*,152*,153*,154*,155*,156*,157*,158*,159*,160*,161*,162*,163*,164*,165*,166*,167*,168*,169*,170*,171*,172*,173*,174*,175*,176*,177*,178*,179*,180*,181*,182*,183*,184*,185*,186*,187*,188*,189*,190*,191*,192*,193*,194*,195*,196*,197*,198*,199*,200*,201*,202*,203*,204*,205*,206*,207*
Domain0 Region00 : 0x0000000002000000-0x000000000200ffff (I)
Domain0 Region01 : 0x0000000080000000-0x00000000803fffff ()
Domain0 Region02 : 0x0000000000000000-0xffffffffffffffff (R,W,X)
Domain0 Next Address : 0x0000000080200000
Domain0 Next Arg1 : 0x00000000bf000000
Domain0 Next Mode : S-mode
Domain0 SysReset : yes

Boot HART ID : 122
Boot HART Domain : root
Boot HART ISA : rv64imafdcsuh
Boot HART Features : scounteren,mcounteren,time
Boot HART PMP Count : 16
Boot HART PMP Granularity : 4
Boot HART PMP Address Bits: 54
Boot HART MHPM Count : 0
Boot HART MIDELEG : 0x0000000000001666
Boot HART MEDELEG : 0x0000000000f0b509


> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
>
> > ---
> > Changes since v2:
> > - Rebased on Linux-5.18-rc3
> > - Use a different range when SBI v0.1 is enabled
> > Changes since v1:
> > - Updated NR_CPUS range to 2-512 which reflects maximum number of
> > CPUs supported by QEMU virt machine.
> > ---
> > arch/riscv/Kconfig | 9 ++++++---
> > 1 file changed, 6 insertions(+), 3 deletions(-)
> >
> > diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> > index 00fd9c548f26..1823f281069f 100644
> > --- a/arch/riscv/Kconfig
> > +++ b/arch/riscv/Kconfig
> > @@ -275,10 +275,13 @@ config SMP
> > If you don't know what to do here, say N.
> >
> > config NR_CPUS
> > - int "Maximum number of CPUs (2-32)"
> > - range 2 32
> > + int "Maximum number of CPUs (2-512)"
> > depends on SMP
> > - default "8"
> > + range 2 512 if !SBI_V01
> > + range 2 32 if SBI_V01 && 32BIT
> > + range 2 64 if SBI_V01 && 64BIT
> > + default "32" if 32BIT
> > + default "64" if 64BIT
> >
> > config HOTPLUG_CPU
> > bool "Support for hot-pluggable CPUs"



--
Regards,
Atish

\
 
 \ /
  Last update: 2022-04-23 02:18    [W:0.064 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site