lkml.org 
[lkml]   [2022]   [Apr]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3] arm64: dts: qcom: db845c: Add support for MCP2517FD
On Thu, Apr 21, 2022 at 01:04:38PM +0530, Vinod Koul wrote:
> Add support for onboard MCP2517FD SPI CAN transceiver attached to
> SPI0 of RB3.
>
> Signed-off-by: Vinod Koul <vkoul@kernel.org>

One comment below but irrespective of that,

Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>

Thanks,
Mani

> ---
> Change in v3:
> - change underscore(_) to dash (-) in can-clock node name
> - remove superfluous status = okay in can node
>
> Changes in v2:
> - add cs and pinctrl config
> - remove misleading comment
>
> arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 32 ++++++++++++++++++++++
> 1 file changed, 32 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> index 28fe45c5d516..d2ade684703d 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> @@ -28,6 +28,13 @@ chosen {
> stdout-path = "serial0:115200n8";
> };
>
> + /* Fixed crystal oscillator dedicated to MCP2517FD */
> + clk40M: can-clock {

clock@?

> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <40000000>;
> + };
> +
> dc12v: dc12v-regulator {
> compatible = "regulator-fixed";
> regulator-name = "DC12V";
> @@ -746,6 +753,23 @@ codec {
> };
> };
>
> +&spi0 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_spi0_default>;
> + cs-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
> +
> + can@0 {
> + compatible = "microchip,mcp2517fd";
> + reg = <0>;
> + clocks = <&clk40M>;
> + interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
> + spi-max-frequency = <10000000>;
> + vdd-supply = <&vdc_5v>;
> + xceiver-supply = <&vdc_5v>;
> + };
> +};
> +
> &spi2 {
> /* On Low speed expansion */
> label = "LS-SPI0";
> @@ -1219,3 +1243,11 @@ ov7251_ep: endpoint {
> };
> };
> };
> +
> +/* PINCTRL - additions to nodes defined in sdm845.dtsi */
> +&qup_spi0_default {
> + config {
> + drive-strength = <6>;
> + bias-disable;
> + };
> +};
> --
> 2.34.1
>

\
 
 \ /
  Last update: 2022-04-21 15:02    [W:1.254 / U:0.952 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site