lkml.org 
[lkml]   [2022]   [Apr]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2] ata: pata_marvell: Check the 'bmdma_addr' beforing reading
From
On 4/21/22 10:39, Zheyu Ma wrote:
> Before detecting the cable type on the dma bar, the driver should check
> whether the 'bmdma_addr' is zero, which means the adapter does not
> support DMA, otherwise we will get the following error:
>
> [ 5.146634] Bad IO access at port 0x1 (return inb(port))
> [ 5.147206] WARNING: CPU: 2 PID: 303 at lib/iomap.c:44 ioread8+0x4a/0x60
> [ 5.150856] RIP: 0010:ioread8+0x4a/0x60
> [ 5.160238] Call Trace:
> [ 5.160470] <TASK>
> [ 5.160674] marvell_cable_detect+0x6e/0xc0 [pata_marvell]
> [ 5.161728] ata_eh_recover+0x3520/0x6cc0
> [ 5.168075] ata_do_eh+0x49/0x3c0
>
> Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
> ---Changes in v2:
> - Delete the useless 'else'

Note for future contributions: The change log should be placed *after*
the "---" that comes before the "diff" line below. Otherwise, the change
log pollutes the commit message.

I fixed that and applied to for-5.18-fixes. Thanks.

> ---
> drivers/ata/pata_marvell.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
> index 0c5a51970fbf..014ccb0f45dc 100644
> --- a/drivers/ata/pata_marvell.c
> +++ b/drivers/ata/pata_marvell.c
> @@ -77,6 +77,8 @@ static int marvell_cable_detect(struct ata_port *ap)
> switch(ap->port_no)
> {
> case 0:
> + if (!ap->ioaddr.bmdma_addr)
> + return ATA_CBL_PATA_UNK;
> if (ioread8(ap->ioaddr.bmdma_addr + 1) & 1)
> return ATA_CBL_PATA40;
> return ATA_CBL_PATA80;


--
Damien Le Moal
Western Digital Research

\
 
 \ /
  Last update: 2022-04-22 01:49    [W:0.333 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site