Messages in this thread Patch in this message | | | From | Luca Weiss <> | Subject | [PATCH 2/3] ARM: dts: msm8974-FP2: Configure charger | Date | Thu, 21 Apr 2022 23:42:42 +0200 |
| |
Set the relevant properties on the smbb charger to allow the device to charge properly.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz> --- arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts index 8f07d8e363aa..34266126d5a2 100644 --- a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts +++ b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts @@ -397,6 +397,16 @@ &sdhc_2 { pinctrl-1 = <&sdc2_off>; }; +&smbb { + usb-charge-current-limit = <1500000>; + qcom,fast-charge-safe-current = <1500000>; + qcom,fast-charge-current-limit = <1500000>; + qcom,fast-charge-safe-voltage = <4380000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,auto-recharge-threshold-voltage = <4240000>; + qcom,minimum-input-voltage = <4450000>; +}; + &tlmm { panel_pin: panel { te { -- 2.36.0
| |