lkml.org 
[lkml]   [2022]   [Apr]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[V6 0/2] arm64: dts: qcom: Configure CTS pin to bias-bus-hold for bluetooth
Date
WLAN rail was leaking power during RBSC/sleep even after turning BT off.
Change pinctrl configuration to handle same.

Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
---
v6: add code comments about how bias-bus-hold could save power
v5: modify subject to include bluetooth
v4: modify subject of each patch to indicate what it is applying to
v3: apply same change to active state and other sc7280*.dts* as well
v2: used bias-bus-hold as per review comments
v1: intial patch used bias-disable for sleep pinctrl in sc7280-idp only
---

Vijaya Krishna Nivarthi (2):
arm64: dts: qcom: sc7280-idp: Configure CTS pin to bias-bus-hold for
bluetooth
arm64: dts: qcom: sc7280-qcard: Configure CTS pin to bias-bus-hold for
bluetooth

arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 18 ++++++++++++------
arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 19 ++++++++++++++-----
2 files changed, 26 insertions(+), 11 deletions(-)

--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by the Linux Foundation.

\
 
 \ /
  Last update: 2022-04-21 17:57    [W:0.071 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site