lkml.org 
[lkml]   [2022]   [Apr]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] dt-bindings: mmc: sdhci-am654: Add flag to force setting to TESTCD bit
Date
The ARASAN MMC controller on Keystone 3 class of devices needs the SDCD
line to be connected for proper functioning. Similar to the issue pointed
out in sdhci-of-arasan.c driver, commit 3794c542641f ("mmc:
sdhci-of-arasan: Set controller to test mode when no CD bit").

In cases where SDCD line is not connected, driver support has been added to
force the controller into test mode and set the TESTCD bit. In order to
implement this quirk the driver uses "ti,fails-without-test-cd" flag from
the device tree node. Therefore, update the bindings to document the above.

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
---
Documentation/devicetree/bindings/mmc/sdhci-am654.yaml | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml
index 0566493c4def..0ab07759b472 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml
+++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml
@@ -186,6 +186,13 @@ properties:
description: Clock Delay Buffer Select
$ref: "/schemas/types.yaml#/definitions/uint32"

+ ti,fails-without-test-cd:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ When present, indicates that the CD line is not connected
+ and the controller is required to be forced into Test mode
+ to set the TESTCD bit.
+
required:
- compatible
- reg
--
2.17.1
\
 
 \ /
  Last update: 2022-04-18 12:22    [W:0.150 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site