lkml.org 
[lkml]   [2022]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/2] mmc: core: add reliable write setting to sysfs and update on read
On Tue, 15 Mar 2022 at 13:40, Marc Mattmüller
<Marc.Mattmueller@netmodule.com> wrote:
>
> On Tue, 2022-03-15 at 10:39 +0100, Ulf Hansson wrote:
> > On Thu, 10 Mar 2022 at 15:08, Avri Altman <Avri.Altman@wdc.com>
> > wrote:
> > >
> > > > The mmc reliable write setting (from ext_csd) was not available
> > > > on the sysfs.
> > > > Thus, added rel_param and rel_write_set to sysfs and added the
> > > > update of
> > > > rel_write_set on sysfs read.
> > > Here also - why adding ABI when its already available via mmc-
> > > utils?
> > >
> > > Thanks,
> > > Avri
> >
> > FYI, I agree with Avri here. Please use mmc-utils.
> >
> > In case the values in sysfs become confusing as they may be outdated
> > at some point, perhaps we should consider dropping them?
> >
> > Kind regards
> > Uffe
>
> Hi,
> yes I was confused about having the lifetime values available in the
> sysfs but without having an update over time. The reliable write values
> were some kind of logic for me to add them as well. That's why I was
> hesitating first to create a single patch for all these values but as
> it concerns two different topics I decided to create a patchset.
>
> Nevertheless, if you propose to use the mmc-utils for the dynamic
> values, it is less confusing if you just keep only the static
> values and drop the dynamic ones.

Okay, that sounds reasonable - and thanks for clarifying.

Kind regards
Uffe

>
> Kind regards
> Marc
>
> >
> > > > Signed-off-by: Marc Mattmueller <marc.mattmueller@netmodule.com>
> > > > ---
> > > > drivers/mmc/core/mmc.c | 29 +++++++++++++++++++++++++++++
> > > > include/linux/mmc/card.h | 1 +
> > > > include/linux/mmc/mmc.h | 1 +
> > > > 3 files changed, 31 insertions(+)
> > > >
> > > > diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
> > > > index
> > > > d9537c894e33..a64d1ecb0de9 100644
> > > > --- a/drivers/mmc/core/mmc.c
> > > > +++ b/drivers/mmc/core/mmc.c
> > > > @@ -364,6 +364,10 @@ static int
> > > > mmc_update_ext_csd_runtime_params(struct mmc_card *card, u8
> > > > *ext_csd) {
> > > > int err = 0;
> > > >
> > > > + /* eMMC v4.41 or later */
> > > > + if (card->ext_csd.rev >= 5)
> > > > + card->ext_csd.rel_wr_set =
> > > > ext_csd[EXT_CSD_WR_REL_SET];
> > > > +
> > > > /* eMMC v5 or later */
> > > > if (card->ext_csd.rev >= 7) {
> > > > card->ext_csd.pre_eol_info =
> > > > ext_csd[EXT_CSD_PRE_EOL_INFO];
> > > > @@ -587,6 +591,7 @@ static int mmc_decode_ext_csd(struct mmc_card
> > > > *card, u8 *ext_csd)
> > > > }
> > > >
> > > > card->ext_csd.rel_param =
> > > > ext_csd[EXT_CSD_WR_REL_PARAM];
> > > > + card->ext_csd.rel_wr_set =
> > > > ext_csd[EXT_CSD_WR_REL_SET];
> > > > card->ext_csd.rst_n_function =
> > > > ext_csd[EXT_CSD_RST_N_FUNCTION];
> > > >
> > > > /*
> > > > @@ -820,6 +825,7 @@ MMC_DEV_ATTR(name, "%s\n", card-
> > > > > cid.prod_name); MMC_DEV_ATTR(oemid, "0x%04x\n", card-
> > > > > >cid.oemid);
> > > > MMC_DEV_ATTR(prv, "0x%x\n", card->cid.prv); MMC_DEV_ATTR(rev,
> > > > "0x%x\n", card->ext_csd.rev);
> > > > +MMC_DEV_ATTR(rel_param, "0x%02x\n", card->ext_csd.rel_param);
> > > > MMC_DEV_ATTR(serial, "0x%08x\n", card->cid.serial);
> > > > MMC_DEV_ATTR(enhanced_area_offset, "%llu\n",
> > > > card->ext_csd.enhanced_area_offset);
> > > > @@ -886,6 +892,27 @@ static ssize_t pre_eol_info_show(struct
> > > > device
> > > > *dev,
> > > >
> > > > static DEVICE_ATTR_RO(pre_eol_info);
> > > >
> > > > +static ssize_t rel_write_set_show(struct device *dev,
> > > > + struct device_attribute *attr,
> > > > + char *buf) {
> > > > + int err = 0;
> > > > + struct mmc_card *card = mmc_dev_to_card(dev);
> > > > +
> > > > + /* before eMMC v4.41 */
> > > > + if (card->ext_csd.rev < 5)
> > > > + return sprintf(buf, "%s\n", "-");
> > > > +
> > > > + /* eMMC v4.41 or later */
> > > > + err = mmc_update_csd(card);
> > > > + if (err)
> > > > + return (ssize_t)err;
> > > > +
> > > > + return sprintf(buf, "0x%02x\n", card-
> > > > >ext_csd.rel_wr_set); }
> > > > +
> > > > +static DEVICE_ATTR_RO(rel_write_set);
> > > > +
> > > > static ssize_t mmc_fwrev_show(struct device *dev,
> > > > struct device_attribute *attr,
> > > > char *buf) @@ -931,6 +958,8 @@
> > > > static struct attribute
> > > > *mmc_std_attrs[] = {
> > > > &dev_attr_oemid.attr,
> > > > &dev_attr_prv.attr,
> > > > &dev_attr_rev.attr,
> > > > + &dev_attr_rel_param.attr,
> > > > + &dev_attr_rel_write_set.attr,
> > > > &dev_attr_pre_eol_info.attr,
> > > > &dev_attr_life_time.attr,
> > > > &dev_attr_serial.attr,
> > > > diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
> > > > index
> > > > 37f975875102..21c47893fcb4 100644
> > > > --- a/include/linux/mmc/card.h
> > > > +++ b/include/linux/mmc/card.h
> > > > @@ -48,6 +48,7 @@ struct mmc_ext_csd {
> > > > u8 sec_feature_support;
> > > > u8 rel_sectors;
> > > > u8 rel_param;
> > > > + u8 rel_wr_set;
> > > > bool enhanced_rpmb_supported;
> > > > u8 part_config;
> > > > u8 cache_ctrl;
> > > > diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
> > > > index
> > > > d9a65c6a8816..42afd442a70a 100644
> > > > --- a/include/linux/mmc/mmc.h
> > > > +++ b/include/linux/mmc/mmc.h
> > > > @@ -266,6 +266,7 @@ static inline bool mmc_ready_for_data(u32
> > > > status)
> > > > #define EXT_CSD_BKOPS_START 164 /* W */
> > > > #define EXT_CSD_SANITIZE_START 165 /* W */
> > > > #define EXT_CSD_WR_REL_PARAM 166 /* RO */
> > > > +#define EXT_CSD_WR_REL_SET 167 /* R/W */
> > > > #define EXT_CSD_RPMB_MULT 168 /* RO */
> > > > #define EXT_CSD_FW_CONFIG 169 /* R/W */
> > > > #define EXT_CSD_BOOT_WP 173 /* R/W */
> > > > --
> > > > 2.20.1

\
 
 \ /
  Last update: 2022-03-15 14:43    [W:0.078 / U:0.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site