lkml.org 
[lkml]   [2022]   [Mar]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v6 5/5] arm64: dts: qcom: sm8250: remove assigned-clock-rate property for mdp clk
    Date
    Drop the assigned clock rate property and vote on the mdp clock as per
    calculated value during the usecase.

    This patch is dependent on below patch
    https://patchwork.kernel.org/patch/12774067/

    Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
    Reviewed-by: Stephen Boyd <swboyd@chromium.org>
    ---
    arch/arm64/boot/dts/qcom/sm8250.dtsi | 9 ++-------
    1 file changed, 2 insertions(+), 7 deletions(-)

    diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
    index fdaf303..2105eb7 100644
    --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
    +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
    @@ -3164,9 +3164,6 @@
    <&dispcc DISP_CC_MDSS_MDP_CLK>;
    clock-names = "iface", "bus", "nrt_bus", "core";

    - assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
    - assigned-clock-rates = <460000000>;
    -
    interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
    interrupt-controller;
    #interrupt-cells = <1>;
    @@ -3191,10 +3188,8 @@
    <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
    clock-names = "iface", "bus", "core", "vsync";

    - assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
    - <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
    - assigned-clock-rates = <460000000>,
    - <19200000>;
    + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
    + assigned-clock-rates = <19200000>;

    operating-points-v2 = <&mdp_opp_table>;
    power-domains = <&rpmhpd SM8250_MMCX>;
    --
    2.7.4
    \
     
     \ /
      Last update: 2022-03-14 15:48    [W:4.102 / U:0.144 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site