lkml.org 
[lkml]   [2022]   [Mar]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 31/67] media: platform: ti-vpe: move config to its own file
Date
In order to better organize the platform/Kconfig, place
ti-vpe-specific config stuff on a separate Kconfig file.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
---

To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover.
See [PATCH v2 00/67] at: https://lore.kernel.org/all/cover.1647274406.git.mchehab@kernel.org/

drivers/media/platform/Kconfig | 60 +-------------------------
drivers/media/platform/ti-vpe/Kconfig | 62 +++++++++++++++++++++++++++
2 files changed, 63 insertions(+), 59 deletions(-)
create mode 100644 drivers/media/platform/ti-vpe/Kconfig

diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index b0acbf3ccb69..228881ae0d22 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -66,6 +66,7 @@ source "drivers/media/platform/stm32/Kconfig"
source "drivers/media/platform/sunxi/sun8i-di/Kconfig"
source "drivers/media/platform/sunxi/sun8i-rotate/Kconfig"
source "drivers/media/platform/tegra/vde/Kconfig"
+source "drivers/media/platform/ti-vpe/Kconfig"

config VIDEO_MUX
tristate "Video Multiplexer"
@@ -106,33 +107,6 @@ source "drivers/media/platform/xilinx/Kconfig"
source "drivers/media/platform/atmel/Kconfig"
source "drivers/media/platform/sunxi/Kconfig"

-config VIDEO_TI_CAL
- tristate "TI CAL (Camera Adaptation Layer) driver"
- depends on V4L_PLATFORM_DRIVERS
- depends on VIDEO_DEV && VIDEO_V4L2
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- depends on SOC_DRA7XX || ARCH_K3 || COMPILE_TEST
- select VIDEOBUF2_DMA_CONTIG
- select V4L2_FWNODE
- help
- Support for the TI CAL (Camera Adaptation Layer) block
- found on DRA72X SoC.
- In TI Technical Reference Manual this module is referred as
- Camera Interface Subsystem (CAMSS).
-
-config VIDEO_TI_CAL_MC
- bool "Media Controller centric mode by default"
- depends on VIDEO_TI_CAL
- default n
- help
- Enables Media Controller centric mode by default.
-
- If set, CAL driver will start in Media Controller mode by
- default. Note that this behavior can be overridden via
- module parameter 'mc_api'.
-
-
# Mem2mem drivers

config VIDEO_MEM2MEM_DEINTERLACE
@@ -212,37 +186,5 @@ config VIDEO_STI_DELTA_DRIVER
select V4L2_MEM2MEM_DEV
select RPMSG

-config VIDEO_TI_VPE
- tristate "TI VPE (Video Processing Engine) driver"
- depends on V4L_MEM2MEM_DRIVERS
- depends on VIDEO_DEV && VIDEO_V4L2
- depends on SOC_DRA7XX || COMPILE_TEST
- select VIDEOBUF2_DMA_CONTIG
- select V4L2_MEM2MEM_DEV
- select VIDEO_TI_VPDMA
- select VIDEO_TI_SC
- select VIDEO_TI_CSC
- help
- Support for the TI VPE(Video Processing Engine) block
- found on DRA7XX SoC.
-
-config VIDEO_TI_VPE_DEBUG
- bool "VPE debug messages"
- depends on V4L_MEM2MEM_DRIVERS
- depends on VIDEO_TI_VPE
- help
- Enable debug messages on VPE driver.
-
-# TI VIDEO PORT Helper Modules
-# These will be selected by VPE and VIP
-config VIDEO_TI_VPDMA
- tristate
-
-config VIDEO_TI_SC
- tristate
-
-config VIDEO_TI_CSC
- tristate
-
# DVB platform drivers
source "drivers/media/platform/sti/c8sectpfe/Kconfig"
diff --git a/drivers/media/platform/ti-vpe/Kconfig b/drivers/media/platform/ti-vpe/Kconfig
new file mode 100644
index 000000000000..a9ee0189f2f2
--- /dev/null
+++ b/drivers/media/platform/ti-vpe/Kconfig
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+# TI VIDEO PORT Helper Modules
+# These will be selected by VPE and VIP
+config VIDEO_TI_VPDMA
+ tristate
+
+config VIDEO_TI_SC
+ tristate
+
+config VIDEO_TI_CSC
+ tristate
+
+# V4L drivers
+
+config VIDEO_TI_CAL
+ tristate "TI CAL (Camera Adaptation Layer) driver"
+ depends on VIDEO_DEV && VIDEO_V4L2
+ depends on V4L_PLATFORM_DRIVERS
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ depends on SOC_DRA7XX || ARCH_K3 || COMPILE_TEST
+ select VIDEOBUF2_DMA_CONTIG
+ select V4L2_FWNODE
+ help
+ Support for the TI CAL (Camera Adaptation Layer) block
+ found on DRA72X SoC.
+ In TI Technical Reference Manual this module is referred as
+ Camera Interface Subsystem (CAMSS).
+
+config VIDEO_TI_CAL_MC
+ bool "Media Controller centric mode by default"
+ depends on VIDEO_TI_CAL
+ default n
+ help
+ Enables Media Controller centric mode by default.
+
+ If set, CAL driver will start in Media Controller mode by
+ default. Note that this behavior can be overridden via
+ module parameter 'mc_api'.
+
+# Mem2mem drivers
+
+config VIDEO_TI_VPE
+ tristate "TI VPE (Video Processing Engine) driver"
+ depends on V4L_MEM2MEM_DRIVERS
+ depends on VIDEO_DEV && VIDEO_V4L2
+ depends on SOC_DRA7XX || COMPILE_TEST
+ select VIDEOBUF2_DMA_CONTIG
+ select V4L2_MEM2MEM_DEV
+ select VIDEO_TI_VPDMA
+ select VIDEO_TI_SC
+ select VIDEO_TI_CSC
+ help
+ Support for the TI VPE(Video Processing Engine) block
+ found on DRA7XX SoC.
+
+config VIDEO_TI_VPE_DEBUG
+ bool "VPE debug messages"
+ depends on VIDEO_TI_VPE
+ help
+ Enable debug messages on VPE driver.
--
2.35.1
\
 
 \ /
  Last update: 2022-03-14 17:39    [W:0.281 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site