Messages in this thread Patch in this message | | | From | Max Krummenacher <> | Subject | [PATCH v1 07/14] ARM: dts: imx6dl-colibri: Command pmic to standby for poweroff | Date | Mon, 14 Mar 2022 17:29:51 +0100 |
| |
The Colibri iMX6 HW doesn't allow to use the PWR_ON_REQ signal for poweroff. Use the fsl,pmic-stby-poweroff property to command the PMIC into a low power mode in poweroff.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> ---
arch/arm/boot/dts/imx6qdl-colibri.dtsi | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index f6243762e918..da52a71bb6e7 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -138,6 +138,10 @@ status = "disabled"; }; +&clks { + fsl,pmic-stby-poweroff; +}; + /* Colibri SSP */ &ecspi4 { cs-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; @@ -403,6 +407,7 @@ pmic: pfuze100@8 { compatible = "fsl,pfuze100"; + fsl,pmic-stby-poweroff; reg = <0x08>; regulators { -- 2.20.1
| |