lkml.org 
[lkml]   [2022]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 6/7] iio: adc: sc27xx: add support for PMIC ump9620
Date
From: Cixi Geng <cixi.geng1@unisoc.com>

The ump9620 is variant from sc27xx chip, add it in here.

Signed-off-by: Yuming Zhu <yuming.zhu1@unisoc.com>
Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com>

V2 changes:
1. remove duplicated function
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>

2. fix the smatch warnings
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
---
drivers/iio/adc/sc27xx_adc.c | 305 ++++++++++++++++++++++++++++++-----
1 file changed, 266 insertions(+), 39 deletions(-)

diff --git a/drivers/iio/adc/sc27xx_adc.c b/drivers/iio/adc/sc27xx_adc.c
index b89637c051ac..e9b680e9c275 100644
--- a/drivers/iio/adc/sc27xx_adc.c
+++ b/drivers/iio/adc/sc27xx_adc.c
@@ -15,12 +15,16 @@
/* PMIC global registers definition */
#define SC2730_MODULE_EN 0x1808
#define SC2731_MODULE_EN 0xc08
+#define UMP9620_MODULE_EN 0x2008
#define SC27XX_MODULE_ADC_EN BIT(5)
#define SC2721_ARM_CLK_EN 0xc0c
#define SC2730_ARM_CLK_EN 0x180c
#define SC2731_ARM_CLK_EN 0xc10
+#define UMP9620_ARM_CLK_EN 0x200c
+#define UMP9620_XTL_WAIT_CTRL0 0x2378
#define SC27XX_CLK_ADC_EN BIT(5)
#define SC27XX_CLK_ADC_CLK_EN BIT(6)
+#define UMP9620_XTL_WAIT_CTRL0_EN BIT(8)

/* ADC controller registers definition */
#define SC27XX_ADC_CTL 0x0
@@ -82,6 +86,13 @@
enum sc27xx_pmic_type {
SC27XX_ADC,
SC2721_ADC,
+ UMP9620_ADC,
+};
+
+enum ump96xx_scale_cal {
+ UMP96XX_VBAT_SENSES_CAL,
+ UMP96XX_VBAT_DET_CAL,
+ UMP96XX_CH1_CAL,
};

struct sc27xx_adc_data {
@@ -139,6 +150,11 @@ static struct sc27xx_adc_linear_graph small_scale_graph = {
100, 341,
};

+static struct sc27xx_adc_linear_graph ump9620_bat_det_graph = {
+ 1400, 3482,
+ 200, 476,
+};
+
/* Add these for sc2731 pmic, and the [big|small]_scale_graph_calib for common's */
static const struct sc27xx_adc_linear_graph sc2731_big_scale_graph_calib = {
4200, 850,
@@ -165,16 +181,41 @@ static int sc27xx_adc_get_calib_data(u32 calib_data, int calib_adc)
return ((calib_data & 0xff) + calib_adc - 128) * 4;
}

+/* get the adc nvmem cell calibration data */
+static int adc_nvmem_cell_calib_data(struct sc27xx_adc_data *data, const char *cell_name)
+{
+ struct nvmem_cell *cell;
+ void *buf;
+ u32 origin_calib_data = 0;
+ size_t len = 0;
+
+ if (!data)
+ return -EINVAL;
+
+ cell = nvmem_cell_get(data->dev, cell_name);
+ if (IS_ERR(cell))
+ return PTR_ERR(cell);
+
+ buf = nvmem_cell_read(cell, &len);
+ if (IS_ERR(buf)) {
+ nvmem_cell_put(cell);
+ return PTR_ERR(buf);
+ }
+
+ memcpy(&origin_calib_data, buf, min(len, sizeof(u32)));
+
+ kfree(buf);
+ nvmem_cell_put(cell);
+ return origin_calib_data;
+}
+
static int sc27xx_adc_scale_calibration(struct sc27xx_adc_data *data,
bool big_scale)
{
const struct sc27xx_adc_linear_graph *calib_graph;
struct sc27xx_adc_linear_graph *graph;
- struct nvmem_cell *cell;
const char *cell_name;
u32 calib_data = 0;
- void *buf;
- size_t len;

if (big_scale) {
calib_graph = data->var_data->bscale_cal;
@@ -186,24 +227,63 @@ static int sc27xx_adc_scale_calibration(struct sc27xx_adc_data *data,
cell_name = "small_scale_calib";
}

- cell = nvmem_cell_get(data->dev, cell_name);
- if (IS_ERR(cell))
- return PTR_ERR(cell);
-
- buf = nvmem_cell_read(cell, &len);
- nvmem_cell_put(cell);
-
- if (IS_ERR(buf))
- return PTR_ERR(buf);
-
- memcpy(&calib_data, buf, min(len, sizeof(u32)));
+ calib_data = adc_nvmem_cell_calib_data(data, cell_name);

/* Only need to calibrate the adc values in the linear graph. */
graph->adc0 = sc27xx_adc_get_calib_data(calib_data, calib_graph->adc0);
graph->adc1 = sc27xx_adc_get_calib_data(calib_data >> 8,
calib_graph->adc1);

- kfree(buf);
+ return 0;
+}
+
+static int ump96xx_adc_scale_cal(struct sc27xx_adc_data *data,
+ enum ump96xx_scale_cal cal_type)
+{
+ struct sc27xx_adc_linear_graph *graph = NULL;
+ const char *cell_name1 = NULL, *cell_name2 = NULL;
+ int adc_calib_data1 = 0, adc_calib_data2 = 0;
+
+ if (!data)
+ return -EINVAL;
+
+ if (cal_type == UMP96XX_VBAT_DET_CAL) {
+ graph = &ump9620_bat_det_graph;
+ cell_name1 = "vbat_det_cal1";
+ cell_name2 = "vbat_det_cal2";
+ } else if (cal_type == UMP96XX_VBAT_SENSES_CAL) {
+ graph = &big_scale_graph;
+ cell_name1 = "big_scale_calib1";
+ cell_name2 = "big_scale_calib2";
+ } else if (cal_type == UMP96XX_CH1_CAL) {
+ graph = &small_scale_graph;
+ cell_name1 = "small_scale_calib1";
+ cell_name2 = "small_scale_calib2";
+ } else {
+ graph = &small_scale_graph;
+ cell_name1 = "small_scale_calib1";
+ cell_name2 = "small_scale_calib2";
+ }
+
+ adc_calib_data1 = adc_nvmem_cell_calib_data(data, cell_name1);
+ if (adc_calib_data1 < 0) {
+ dev_err(data->dev, "err! %s:%d\n", cell_name1, adc_calib_data1);
+ return adc_calib_data1;
+ }
+
+ adc_calib_data2 = adc_nvmem_cell_calib_data(data, cell_name2);
+ if (adc_calib_data2 < 0) {
+ dev_err(data->dev, "err! %s:%d\n", cell_name2, adc_calib_data2);
+ return adc_calib_data2;
+ }
+
+ /*
+ *Read the data in the two blocks of efuse and convert them into the
+ *calibration value in the ump9620 adc linear graph.
+ */
+ graph->adc0 = (adc_calib_data1 & 0xfff0) >> 4;
+ graph->adc1 = (adc_calib_data2 & 0xfff0) >> 4;
+
return 0;
}

@@ -394,6 +474,50 @@ static int sc2731_adc_get_ratio(int channel, int scale)
return SC27XX_VOLT_RATIO(1, 1);
}

+static int ump9620_adc_get_ratio(int channel, int scale)
+{
+ switch (channel) {
+ case 11:
+ return SC27XX_VOLT_RATIO(1, 1);
+ case 14:
+ switch (scale) {
+ case 0:
+ return SC27XX_VOLT_RATIO(68, 900);
+ default:
+ return SC27XX_VOLT_RATIO(1, 1);
+ }
+ case 15:
+ switch (scale) {
+ case 0:
+ return SC27XX_VOLT_RATIO(1, 3);
+ default:
+ return SC27XX_VOLT_RATIO(1, 1);
+ }
+ case 21:
+ case 22:
+ case 23:
+ switch (scale) {
+ case 0:
+ return SC27XX_VOLT_RATIO(3, 8);
+ default:
+ return SC27XX_VOLT_RATIO(1, 1);
+ }
+ default:
+ switch (scale) {
+ case 0:
+ return SC27XX_VOLT_RATIO(1, 1);
+ case 1:
+ return SC27XX_VOLT_RATIO(1000, 1955);
+ case 2:
+ return SC27XX_VOLT_RATIO(1000, 2600);
+ case 3:
+ return SC27XX_VOLT_RATIO(1000, 4060);
+ default:
+ return SC27XX_VOLT_RATIO(1, 1);
+ }
+ }
+}
+
/*
* According to the datasheet set specific value on some channel.
*/
@@ -453,6 +577,22 @@ static void sc2731_adc_scale_init(struct sc27xx_adc_data *data)
}
}

+static void ump9620_adc_scale_init(struct sc27xx_adc_data *data)
+{
+ int i;
+
+ for (i = 0; i < SC27XX_ADC_CHANNEL_MAX; i++) {
+ if (i == 10 || i == 19 || i == 30 || i == 31)
+ data->channel_scale[i] = 3;
+ else if (i == 7 || i == 9)
+ data->channel_scale[i] = 2;
+ else if (i == 0 || i == 13)
+ data->channel_scale[i] = 1;
+ else
+ data->channel_scale[i] = 0;
+ }
+}
+
static int sc27xx_adc_read(struct sc27xx_adc_data *data, int channel,
int scale, int *val)
{
@@ -567,7 +707,7 @@ static void sc27xx_adc_volt_ratio(struct sc27xx_adc_data *data,
*div_denominator = ratio & SC27XX_RATIO_DENOMINATOR_MASK;
}

-static int sc27xx_adc_to_volt(struct sc27xx_adc_linear_graph *graph,
+static int adc_to_volt(struct sc27xx_adc_linear_graph *graph,
int raw_adc)
{
int tmp;
@@ -576,6 +716,31 @@ static int sc27xx_adc_to_volt(struct sc27xx_adc_linear_graph *graph,
tmp /= (graph->adc0 - graph->adc1);
tmp += graph->volt1;

+ return tmp;
+}
+
+static int sc27xx_adc_to_volt(struct sc27xx_adc_linear_graph *graph,
+ int raw_adc)
+{
+ int tmp;
+
+ tmp = adc_to_volt(graph, raw_adc);
+
+ return tmp < 0 ? 0 : tmp;
+}
+
+static int ump96xx_adc_to_volt(struct sc27xx_adc_linear_graph *graph, int scale,
+ int raw_adc)
+{
+ int tmp;
+
+ tmp = adc_to_volt(graph, raw_adc);
+
+ if (scale == 2)
+ tmp = tmp * 2600 / 1000;
+ else if (scale == 3)
+ tmp = tmp * 4060 / 1000;
+
return tmp < 0 ? 0 : tmp;
}

@@ -585,23 +750,46 @@ static int sc27xx_adc_convert_volt(struct sc27xx_adc_data *data, int channel,
u32 numerator, denominator;
u32 volt;

- /*
- * Convert ADC values to voltage values according to the linear graph,
- * and channel 5 and channel 1 has been calibrated, so we can just
- * return the voltage values calculated by the linear graph. But other
- * channels need be calculated to the real voltage values with the
- * voltage ratio.
- */
- switch (channel) {
- case 5:
- return sc27xx_adc_to_volt(&big_scale_graph, raw_adc);
+ if (data->var_data->pmic_type == UMP9620_ADC) {
+ switch (channel) {
+ case 0:
+ if (scale == 1)
+ volt = sc27xx_adc_to_volt(&ump9620_bat_det_graph, raw_adc);
+ else
+ volt = ump96xx_adc_to_volt(&small_scale_graph, scale, raw_adc);
+ break;
+ case 11:
+ volt = sc27xx_adc_to_volt(&big_scale_graph, raw_adc);
+ break;
+ default:
+ if (scale == 1)
+ volt = sc27xx_adc_to_volt(&ump9620_bat_det_graph, raw_adc);
+ else
+ volt = ump96xx_adc_to_volt(&small_scale_graph, scale, raw_adc);
+ break;
+ }

- case 1:
- return sc27xx_adc_to_volt(&small_scale_graph, raw_adc);
+ if (channel == 0 && scale == 1)
+ return volt;
+ } else {
+ /*
+ * Convert ADC values to voltage values according to the linear graph,
+ * and channel 5 and channel 1 has been calibrated, so we can just
+ * return the voltage values calculated by the linear graph. But other
+ * channels need be calculated to the real voltage values with the
+ * voltage ratio.
+ */
+ switch (channel) {
+ case 5:
+ return sc27xx_adc_to_volt(&big_scale_graph, raw_adc);

- default:
- volt = sc27xx_adc_to_volt(&small_scale_graph, raw_adc);
- break;
+ case 1:
+ return sc27xx_adc_to_volt(&small_scale_graph, raw_adc);
+
+ default:
+ volt = sc27xx_adc_to_volt(&small_scale_graph, raw_adc);
+ break;
+ }
}

sc27xx_adc_volt_ratio(data, channel, scale, &numerator, &denominator);
@@ -619,6 +807,7 @@ static int sc27xx_adc_read_processed(struct sc27xx_adc_data *data,
return ret;

*val = sc27xx_adc_convert_volt(data, channel, scale, raw_adc);
+
return 0;
}

@@ -736,21 +925,42 @@ static int sc27xx_adc_enable(struct sc27xx_adc_data *data)
if (ret)
return ret;

- /* Enable ADC work clock and controller clock */
+ /* Enable 26MHz crvstal oscillator wait cycles for UMP9620 ADC */
+ if (data->var_data->pmic_type == UMP9620_ADC) {
+ ret = regmap_update_bits(data->regmap, UMP9620_XTL_WAIT_CTRL0,
+ UMP9620_XTL_WAIT_CTRL0_EN,
+ UMP9620_XTL_WAIT_CTRL0_EN);
+ }
+
+ /* Enable ADC work clock */
ret = regmap_update_bits(data->regmap, data->var_data->clk_en,
SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN,
SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN);
if (ret)
goto disable_adc;

- /* ADC channel scales' calibration from nvmem device */
- ret = sc27xx_adc_scale_calibration(data, true);
- if (ret)
- goto disable_clk;
+ /* ADC channel scales calibration from nvmem device */
+ if (data->var_data->pmic_type == UMP9620_ADC) {
+ ret = ump96xx_adc_scale_cal(data, UMP96XX_VBAT_SENSES_CAL);
+ if (ret)
+ goto disable_clk;

- ret = sc27xx_adc_scale_calibration(data, false);
- if (ret)
- goto disable_clk;
+ ret = ump96xx_adc_scale_cal(data, UMP96XX_VBAT_DET_CAL);
+ if (ret)
+ goto disable_clk;
+
+ ret = ump96xx_adc_scale_cal(data, UMP96XX_CH1_CAL);
+ if (ret)
+ goto disable_clk;
+ } else {
+ ret = sc27xx_adc_scale_calibration(data, true);
+ if (ret)
+ goto disable_clk;
+
+ ret = sc27xx_adc_scale_calibration(data, false);
+ if (ret)
+ goto disable_clk;
+ }

return 0;

@@ -774,6 +984,10 @@ static void sc27xx_adc_disable(void *_data)

regmap_update_bits(data->regmap, data->var_data->module_en,
SC27XX_MODULE_ADC_EN, 0);
+
+ if (data->var_data->pmic_type == UMP9620_ADC)
+ regmap_update_bits(data->regmap, UMP9620_XTL_WAIT_CTRL0,
+ UMP9620_XTL_WAIT_CTRL0_EN, 0);
}

static const struct sc27xx_adc_variant_data sc2731_data = {
@@ -824,6 +1038,18 @@ static const struct sc27xx_adc_variant_data sc2720_data = {
.get_ratio = sc2720_adc_get_ratio,
};

+static const struct sc27xx_adc_variant_data ump9620_data = {
+ .pmic_type = UMP9620_ADC,
+ .module_en = UMP9620_MODULE_EN,
+ .clk_en = UMP9620_ARM_CLK_EN,
+ .scale_shift = SC27XX_ADC_SCALE_SHIFT,
+ .scale_mask = SC27XX_ADC_SCALE_MASK,
+ .bscale_cal = &big_scale_graph,
+ .sscale_cal = &small_scale_graph,
+ .init_scale = ump9620_adc_scale_init,
+ .get_ratio = ump9620_adc_get_ratio,
+};
+
static int sc27xx_adc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -917,6 +1143,7 @@ static const struct of_device_id sc27xx_adc_of_match[] = {
{ .compatible = "sprd,sc2730-adc", .data = &sc2730_data},
{ .compatible = "sprd,sc2721-adc", .data = &sc2721_data},
{ .compatible = "sprd,sc2720-adc", .data = &sc2720_data},
+ { .compatible = "sprd,ump9620-adc", .data = &ump9620_data},
{ }
};
MODULE_DEVICE_TABLE(of, sc27xx_adc_of_match);
--
2.25.1
\
 
 \ /
  Last update: 2022-03-11 17:48    [W:0.710 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site