lkml.org 
[lkml]   [2022]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH] usb: dwc2: Add missing check for dwc2_vbus_supply_init
Date
On 3/10/2022 10:33 AM, Jiasheng Jiang wrote:
> As the potential failure of the dwc2_vbus_supply_init(),
> it should be better to handle the return value and check
> it.
>
> Fixes: cd7cd0e6cedf ("usb: dwc2: fix unbalanced use of external vbus-supply")
> Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>

Acked-by: Minas Harutyunyan <hminas@synopsys.com>

> ---
> drivers/usb/dwc2/hcd.c | 8 +++++---
> 1 file changed, 5 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
> index f63a27d11fac..c8786d223dcd 100644
> --- a/drivers/usb/dwc2/hcd.c
> +++ b/drivers/usb/dwc2/hcd.c
> @@ -3672,7 +3672,7 @@ static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq,
> hprt0 |= HPRT0_PWR;
> dwc2_writel(hsotg, hprt0, HPRT0);
> if (!pwr)
> - dwc2_vbus_supply_init(hsotg);
> + retval = dwc2_vbus_supply_init(hsotg);
> break;
>
> case USB_PORT_FEAT_RESET:
> @@ -3722,7 +3722,7 @@ static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq,
> "In host mode, hprt0=%08x\n", hprt0);
> dwc2_writel(hsotg, hprt0, HPRT0);
> if (!pwr)
> - dwc2_vbus_supply_init(hsotg);
> + retval = dwc2_vbus_supply_init(hsotg);
> }
>
> /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */
> @@ -4523,7 +4523,9 @@ static int _dwc2_hcd_resume(struct usb_hcd *hcd)
>
> /* Enable external vbus supply after resuming the port. */
> spin_unlock_irqrestore(&hsotg->lock, flags);
> - dwc2_vbus_supply_init(hsotg);
> + ret = dwc2_vbus_supply_init(hsotg);
> + if (ret)
> + return ret;
>
> /* Wait for controller to correctly update D+/D- level */
> usleep_range(3000, 5000);

\
 
 \ /
  Last update: 2022-03-11 07:24    [W:0.073 / U:0.808 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site