Messages in this thread | | | Date | Thu, 10 Mar 2022 11:09:43 +0100 | From | Pali Rohár <> | Subject | Re: [PATCH v2] arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0 |
| |
On Thursday 10 March 2022 11:05:00 Gregory CLEMENT wrote: > Hello Pali, > > > Legacy and old PCI I/O based cards do not support 32-bit I/O addressing. > > > > Since commit 64f160e19e92 ("PCI: aardvark: Configure PCIe resources from > > 'ranges' DT property") kernel can set different PCIe address on CPU and > > different on the bus for the one A37xx address mapping without any firmware > > support in case the bus address does not conflict with other A37xx mapping. > > > > So remap I/O space to the bus address 0x0 to enable support for old legacy > > I/O port based cards which have hardcoded I/O ports in low address space. > > > > Note that DDR on A37xx is mapped to bus address 0x0. And mapping of I/O > > space can be set to address 0x0 too because MEM space and I/O space are > > separate and so do not conflict. > > > > Remapping IO space on Turris Mox to different address is not possible to > > due bootloader bug. > > > > Signed-off-by: Pali Rohár <pali@kernel.org> > > Reported-by: Arnd Bergmann <arnd@arndb.de> > > Fixes: 76f6386b25cc ("arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700") > > Cc: stable@vger.kernel.org # 64f160e19e92 ("PCI: aardvark: Configure PCIe resources from 'ranges' DT property") > > Cc: stable@vger.kernel.org # 514ef1e62d65 ("arm64: dts: marvell: armada-37xx: Extend PCIe MEM space") > > > Cc: stable@vger.kernel.org # ???????????? ("arm64: dts: marvell: armada-37xx: Increase PCIe IO size from 64 KiB to 1 MiB") > > This patch has been refused by Arnd so I removed it from the mvebu/fixes > branch so you should not apply anything on top of it.
Ok, so what is wrong with a change which increase size of IO space to 1 MB?
> Actually I still try to first apply the old patch and then this one but > it still fail. And it is also failed when I applied this one on a > v5.17-rc1, so I wondered on which did create this patch.
Ok, at which branch / commit should I rebase it?
> Grégory > > > --- > > Changes in v2: > > * Do not remap IO space on Turris Mox > > --- > > arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 7 ++++++- > > arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 2 +- > > 2 files changed, 7 insertions(+), 2 deletions(-) > > > > diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts > > index 6581092c2c90..2838e3f65ada 100644 > > --- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts > > +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts > > @@ -150,17 +150,22 @@ > > slot-power-limit = <10000>; > > /* > > * U-Boot port for Turris Mox has a bug which always expects that "ranges" DT property > > * contains exactly 2 ranges with 3 (child) address cells, 2 (parent) address cells and > > - * 2 size cells and also expects that the second range starts at 16 MB offset. If these > > + * 2 size cells and also expects that the second range starts at 16 MB offset. Also it > > + * expects that first range uses same address for PCI (child) and CPU (parent) cells (so > > + * no remapping) and that this address is the lowest from all specified ranges. If these > > * conditions are not met then U-Boot crashes during loading kernel DTB file. PCIe address > > * space is 128 MB long, so the best split between MEM and IO is to use fixed 16 MB window > > * for IO and the rest 112 MB (64+32+16) for MEM. Controller supports 32-bit IO mapping. > > * This bug is not present in U-Boot ports for other Armada 3700 devices and is fixed in > > * U-Boot version 2021.07. See relevant U-Boot commits (the last one contains fix): > > * https://source.denx.de/u-boot/u-boot/-/commit/cb2ddb291ee6fcbddd6d8f4ff49089dfe580f5d7 > > * https://source.denx.de/u-boot/u-boot/-/commit/c64ac3b3185aeb3846297ad7391fc6df8ecd73bf > > * https://source.denx.de/u-boot/u-boot/-/commit/4a82fca8e330157081fc132a591ebd99ba02ee33 > > + * Bug related to requirement of same child and parent addresses for first range is fixed > > + * in U-Boot version 2022.04 by following commit: > > + * https://source.denx.de/u-boot/u-boot/-/commit/1fd54253bca7d43d046bba4853fe5fafd034bc17 > > */ > > #address-cells = <3>; > > #size-cells = <2>; > > ranges = <0x81000000 0 0xe8000000 0 0xe8000000 0 0x01000000 /* Port 0 IO */ > > diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi > > index 549c3f7c5b27..a099b7787429 100644 > > --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi > > +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi > > @@ -514,9 +514,9 @@ > > * IO at the end and the remaining seven windows > > * (totaling 127 MiB) for MEM. > > */ > > ranges = <0x82000000 0 0xe8000000 0 0xe8000000 0 0x07f00000 /* Port 0 MEM */ > > - 0x81000000 0 0xeff00000 0 0xeff00000 0 0x00100000>; /* Port 0 IO*/ > > + 0x81000000 0 0x00000000 0 0xeff00000 0 0x00100000>; /* Port 0 IO */ > > interrupt-map-mask = <0 0 0 7>; > > interrupt-map = <0 0 0 1 &pcie_intc 0>, > > <0 0 0 2 &pcie_intc 1>, > > <0 0 0 3 &pcie_intc 2>, > > -- > > 2.20.1 > > > > -- > Gregory Clement, Bootlin > Embedded Linux and Kernel engineering > http://bootlin.com
| |