lkml.org 
[lkml]   [2022]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectAw: Re: [PATCH v1] arm64: dts: rockchip: Add sata2 node to rk356x
Date
Hi

> Gesendet: Samstag, 26. Februar 2022 um 19:15 Uhr
> Von: "Peter Geis" <pgwipeout@gmail.com>
> On Sat, Feb 26, 2022 at 1:08 PM Heiko Stübner <heiko@sntech.de> wrote:
> >
> > Hi Frank,
> >
> > Am Samstag, 26. Februar 2022, 14:57:24 CET schrieb Frank Wunderlich:
> > > From: Frank Wunderlich <frank-w@public-files.de>
> > >
> > > RK356x supports up to 3 sata controllers which were compatible with the
> > > existing snps,dwc-ahci binding.
> > >
> > > My board has only sata2 connected to combphy2 so only add this one.
> >
> > how far does the added node diverge from the vendor kernel?
> >
> > If it's pretty much similar between both, we can assume the other nodes
> > should work pretty well as well and therefore should all of them at once
> > and hope for the best?
>
> There's essentially zero divergence (minus the change due to combophy
> changing), and likely won't be until the ahci-platform.txt is
> converted to yaml.
>
> I have tested both SATA1 and SATA2 successfully on the rk3566.
> I don't have any rk3568 boards that are operational yet to test SATA0.

Like Peter says, the sata-node(s) is basicly same as downstream, only combphy-label has changed.
Sata1 from Peters tree [1] seems to have only this change.
I'll send an followup containing all 3, but had only tested sata2.

already sent a bindings-patch for the ahci-platform.txt [2]

regards Frank

[1] https://gitlab.com/pgwipeout/linux-next/-/blob/main/arch/arm64/boot/dts/rockchip/rk356x.dtsi#L238
[2] https://lore.kernel.org/lkml/20220226204404.109867-1-linux@fw-web.de/T/

\
 
 \ /
  Last update: 2022-02-27 09:15    [W:0.371 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site