lkml.org 
[lkml]   [2022]   [Feb]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 2/7] iio: potentiometer: Add available functionality
On Wed, 23 Feb 2022 22:05:20 +0530
Jagath Jog J <jagathjog1996@gmail.com> wrote:

> Adding available functionality for DS1803 driver which
> will show the minimum, step and maximum values that the
> driver can accepts through sysfs entry.
> Now using the max value present in avail array instead of chip
> type specific macro to make the driver flexible to add other
> type of potentiometer with different max position value.
>
> Signed-off-by: Jagath Jog J <jagathjog1996@gmail.com>
> ---
> drivers/iio/potentiometer/ds1803.c | 61 ++++++++++++++++++++++--------
> 1 file changed, 45 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/iio/potentiometer/ds1803.c b/drivers/iio/potentiometer/ds1803.c
> index 3c542a50ece6..9610269bed7f 100644
> --- a/drivers/iio/potentiometer/ds1803.c
> +++ b/drivers/iio/potentiometer/ds1803.c
> @@ -16,7 +16,6 @@
> #include <linux/module.h>
> #include <linux/mod_devicetable.h>
>
> -#define DS1803_MAX_POS 255
> #define DS1803_WRITE(chan) (0xa8 | ((chan) + 1))
>
> enum ds1803_type {
> @@ -26,27 +25,23 @@ enum ds1803_type {
> };
>
> struct ds1803_cfg {
> + int avail[3];
> int kohms;
> };
>
> -static const struct ds1803_cfg ds1803_cfg[] = {
> - [DS1803_010] = { .kohms = 10, },
> - [DS1803_050] = { .kohms = 50, },
> - [DS1803_100] = { .kohms = 100, },
> -};
> -
> struct ds1803_data {
> struct i2c_client *client;
> const struct ds1803_cfg *cfg;
> };
>
> -#define DS1803_CHANNEL(ch) { \
> - .type = IIO_RESISTANCE, \
> - .indexed = 1, \
> - .output = 1, \
> - .channel = (ch), \
> - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
> - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
> +#define DS1803_CHANNEL(ch) { \
> + .type = IIO_RESISTANCE, \
> + .indexed = 1, \
> + .output = 1, \
> + .channel = (ch), \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
> + .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_RAW), \
> }
>
> static const struct iio_chan_spec ds1803_channels[] = {
> @@ -54,6 +49,21 @@ static const struct iio_chan_spec ds1803_channels[] = {
> DS1803_CHANNEL(1),
> };
>
> +static const struct ds1803_cfg ds1803_cfg[] = {
> + [DS1803_010] = {
> + .avail = { 0, 1, 255 },
Why non standard indenting. These should be a tab in rather than
a couple of spaces.

I'll fixup whilst applying.

Jonathan

> + .kohms = 10,
> + },
> + [DS1803_050] = {
> + .avail = { 0, 1, 255 },
> + .kohms = 50,
> + },
> + [DS1803_100] = {
> + .avail = { 0, 1, 255 },
> + .kohms = 100,
> + },
> +};
> +
> static int ds1803_read_raw(struct iio_dev *indio_dev,
> struct iio_chan_spec const *chan,
> int *val, int *val2, long mask)
> @@ -75,7 +85,7 @@ static int ds1803_read_raw(struct iio_dev *indio_dev,
>
> case IIO_CHAN_INFO_SCALE:
> *val = 1000 * data->cfg->kohms;
> - *val2 = DS1803_MAX_POS;
> + *val2 = data->cfg->avail[2]; /* Max wiper position */
> return IIO_VAL_FRACTIONAL;
> }
>
> @@ -88,13 +98,14 @@ static int ds1803_write_raw(struct iio_dev *indio_dev,
> {
> struct ds1803_data *data = iio_priv(indio_dev);
> int pot = chan->channel;
> + int max_pos = data->cfg->avail[2];
>
> if (val2 != 0)
> return -EINVAL;
>
> switch (mask) {
> case IIO_CHAN_INFO_RAW:
> - if (val > DS1803_MAX_POS || val < 0)
> + if (val > max_pos || val < 0)
> return -EINVAL;
> break;
> default:
> @@ -104,9 +115,27 @@ static int ds1803_write_raw(struct iio_dev *indio_dev,
> return i2c_smbus_write_byte_data(data->client, DS1803_WRITE(pot), val);
> }
>
> +static int ds1803_read_avail(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + const int **vals, int *type,
> + int *length, long mask)
> +{
> + struct ds1803_data *data = iio_priv(indio_dev);
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + *vals = data->cfg->avail;
> + *length = ARRAY_SIZE(data->cfg->avail);
> + *type = IIO_VAL_INT;
> + return IIO_AVAIL_RANGE;
> + }
> + return -EINVAL;
> +}
> +
> static const struct iio_info ds1803_info = {
> .read_raw = ds1803_read_raw,
> .write_raw = ds1803_write_raw,
> + .read_avail = ds1803_read_avail,
> };
>
> static int ds1803_probe(struct i2c_client *client, const struct i2c_device_id *id)

\
 
 \ /
  Last update: 2022-02-26 19:33    [W:3.123 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site