lkml.org 
[lkml]   [2022]   [Feb]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2] arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint
Hi,

(CC-ed DRM bridge maintainers and the dri-devel ML)

On Wed, Feb 2, 2022 at 1:47 AM Nícolas F. R. A. Prado
<nfraprado@collabora.com> wrote:
>
> mt8183-kukui-jacuzzi has an anx7625 bridge connected to the output of
> its DSI host. However, after commit fd0310b6fe7d ("drm/bridge: anx7625:
> add MIPI DPI input feature"), a bus-type property started being required
> in the endpoint node by the driver to indicate whether it is DSI or DPI.
>
> Add the missing bus-type property and set it to 5
> (V4L2_FWNODE_BUS_TYPE_PARALLEL) so that the driver has its input
> configured to DSI and the display pipeline can probe correctly.

Don't people find it odd that this is setting the bus-type to "parallel"
(5) for the device to use DSI? Instead of "MIPI CSI-2 D-PHY" (4) or even
"MIPI CSI-2 C-PHY" (1) which is specified in the binding? It's completely
backwards.

Would it be possible to fix the binding and driver at this point?


Thanks
ChenYu

> While at it, also set the data-lanes property that was also introduced
> in that same commit, so that we don't rely on the default value.
>
> Fixes: fd0310b6fe7d ("drm/bridge: anx7625: add MIPI DPI input feature")
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
>
> ---
> v1: https://lore.kernel.org/all/20220120224204.773117-1-nfraprado@collabora.com
>
> Changes in v2:
> - (thanks Rob) Use proper format when refering to commit in commit
> message as pointed out by checkpatch
>
> arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
> index 8f7bf33f607d..e8f133dc96b9 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
> @@ -171,6 +171,8 @@ port@0 {
>
> anx7625_in: endpoint {
> remote-endpoint = <&dsi_out>;
> + bus-type = <5>;
> + data-lanes = <0 1 2 3>;
> };
> };
>
> --
> 2.35.1
>
>
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek

\
 
 \ /
  Last update: 2022-02-24 04:54    [W:0.056 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site