lkml.org 
[lkml]   [2022]   [Feb]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 2/2] Input: add Imagis touchscreen driver
Date
Add support for the IST3038C touchscreen IC from Imagis, based on
downstream driver. The driver supports multi-touch (10 touch points)
The IST3038C IC supports touch keys, but the support isn't added
because the touch screen used for testing doesn't utilize touch keys.
Looking at the downstream driver, it is possible to add support
for other Imagis ICs of IST30**C series.

Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
---
MAINTAINERS | 6 +
drivers/input/touchscreen/Kconfig | 10 +
drivers/input/touchscreen/Makefile | 1 +
drivers/input/touchscreen/imagis.c | 341 +++++++++++++++++++++++++++++
4 files changed, 358 insertions(+)
create mode 100644 drivers/input/touchscreen/imagis.c

diff --git a/MAINTAINERS b/MAINTAINERS
index a899828a8d4e..3b99c60e9f4b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9411,6 +9411,12 @@ M: Stanislaw Gruszka <stf_xl@wp.pl>
S: Maintained
F: drivers/usb/atm/ueagle-atm.c

+IMAGIS TOUCHSCREEN DRIVER
+M: Markuss Broks <markuss.broks@gmail.com>
+S: Maintained
+F: Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
+F: drivers/input/touchscreen/imagis.c
+
IMGTEC ASCII LCD DRIVER
M: Paul Burton <paulburton@kernel.org>
S: Maintained
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 2f6adfb7b938..a0f929506228 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -638,6 +638,16 @@ config TOUCHSCREEN_MTOUCH
To compile this driver as a module, choose M here: the
module will be called mtouch.

+config TOUCHSCREEN_IMAGIS
+ tristate "Imagis touchscreen support"
+ depends on I2C
+ help
+ Say Y here if you have an Imagis IST30xxC touchscreen.
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imagis.
+
config TOUCHSCREEN_IMX6UL_TSC
tristate "Freescale i.MX6UL touchscreen controller"
depends on ((OF && GPIOLIB) || COMPILE_TEST) && HAS_IOMEM
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 39a8127cf6a5..557f84fd2075 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -49,6 +49,7 @@ obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix_ts.o
obj-$(CONFIG_TOUCHSCREEN_HIDEEP) += hideep.o
obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o
obj-$(CONFIG_TOUCHSCREEN_ILITEK) += ilitek_ts_i2c.o
+obj-$(CONFIG_TOUCHSCREEN_IMAGIS) += imagis.o
obj-$(CONFIG_TOUCHSCREEN_IMX6UL_TSC) += imx6ul_tsc.o
obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o
obj-$(CONFIG_TOUCHSCREEN_IPROC) += bcm_iproc_tsc.o
diff --git a/drivers/input/touchscreen/imagis.c b/drivers/input/touchscreen/imagis.c
new file mode 100644
index 000000000000..df26b90371c3
--- /dev/null
+++ b/drivers/input/touchscreen/imagis.c
@@ -0,0 +1,341 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/regulator/consumer.h>
+
+#define IST3038C_HIB_ACCESS (0x800B << 16)
+#define IST3038C_DIRECT_ACCESS BIT(31)
+#define IST3038C_REG_CHIPID 0x40001000
+#define IST3038C_REG_HIB_BASE 0x30000100
+#define IST3038C_REG_TOUCH_STATUS (IST3038C_REG_HIB_BASE | IST3038C_HIB_ACCESS)
+#define IST3038C_REG_TOUCH_COORD (IST3038C_REG_HIB_BASE | IST3038C_HIB_ACCESS | 0x8)
+#define IST3038C_REG_INTR_MESSAGE (IST3038C_REG_HIB_BASE | IST3038C_HIB_ACCESS | 0x4)
+#define IST3038C_WHOAMI 0x38c
+#define IST3038C_CHIP_ON_DELAY 60 // ms
+#define IST3038C_I2C_RETRY_COUNT 3
+#define IST3038C_MAX_SUPPORTED_FINGER_NUM 10
+#define IST3038C_X_MASK GENMASK(23, 12)
+#define IST3038C_X_SHIFT 12
+#define IST3038C_Y_MASK GENMASK(11, 0)
+#define IST3038C_AREA_MASK GENMASK(27, 24)
+#define IST3038C_AREA_SHIFT 24
+#define IST3038C_FINGER_COUNT_MASK GENMASK(15, 12)
+#define IST3038C_FINGER_COUNT_SHIFT 12
+#define IST3038C_FINGER_STATUS_MASK GENMASK(9, 0)
+
+struct imagis_ts {
+ struct i2c_client *client;
+ struct input_dev *input_dev;
+ struct touchscreen_properties prop;
+ struct regulator_bulk_data supplies[2];
+};
+
+static int imagis_i2c_read_reg(struct imagis_ts *ts,
+ unsigned int reg, unsigned int *buffer)
+{
+ __be32 reg_be = cpu_to_be32(reg);
+ struct i2c_msg msg[] = {
+ {
+ .addr = ts->client->addr,
+ .flags = 0,
+ .buf = (unsigned char *)&reg_be,
+ .len = sizeof(reg_be),
+ }, {
+ .addr = ts->client->addr,
+ .flags = I2C_M_RD,
+ .buf = (unsigned char *)buffer,
+ .len = sizeof(reg_be),
+ },
+ };
+ int ret, error;
+ int retry = IST3038C_I2C_RETRY_COUNT;
+
+ do { // The controller might need several reads until it returns a value
+ ret = i2c_transfer(ts->client->adapter, msg, ARRAY_SIZE(msg));
+ if (ret == ARRAY_SIZE(msg)) {
+ *buffer = be32_to_cpu(*buffer);
+ return 0;
+ }
+
+ error = ret < 0 ? ret : -EIO;
+ dev_err(&ts->client->dev,
+ "%s - i2c_transfer failed: %d (%d)\n",
+ __func__, error, ret);
+ } while (--retry);
+
+ return error;
+}
+
+static irqreturn_t imagis_interrupt(int irq, void *dev_id)
+{
+ struct imagis_ts *ts = dev_id;
+ unsigned int finger_status, intr_message;
+ int error, i, finger_count, finger_pressed;
+
+ error = imagis_i2c_read_reg(ts, IST3038C_REG_INTR_MESSAGE, &intr_message);
+ if (error) {
+ dev_err(&ts->client->dev, "failed to read the interrupt message\n");
+ return IRQ_HANDLED;
+ }
+
+ finger_count = (intr_message & IST3038C_FINGER_COUNT_MASK) >> IST3038C_FINGER_COUNT_SHIFT;
+ finger_pressed = intr_message & IST3038C_FINGER_STATUS_MASK;
+ if (finger_count > IST3038C_MAX_SUPPORTED_FINGER_NUM) {
+ dev_err(&ts->client->dev, "finger count is more than maximum supported\n");
+ return IRQ_HANDLED;
+ }
+
+ for (i = 0; i < finger_count; i++) {
+ error = imagis_i2c_read_reg(ts, IST3038C_REG_TOUCH_COORD + (i * 4), &finger_status);
+ if (error) {
+ dev_err(&ts->client->dev, "failed to read coordinates for finger %d\n", i);
+ return IRQ_HANDLED;
+ }
+ input_mt_slot(ts->input_dev, i);
+ input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER,
+ finger_pressed & BIT(i));
+ touchscreen_report_pos(ts->input_dev, &ts->prop,
+ (finger_status & IST3038C_X_MASK) >> IST3038C_X_SHIFT,
+ finger_status & IST3038C_Y_MASK, 1);
+ input_report_abs(ts->input_dev, ABS_MT_TOUCH_MAJOR,
+ (finger_status & IST3038C_AREA_MASK) >> IST3038C_AREA_SHIFT);
+ }
+ input_mt_sync_frame(ts->input_dev);
+ input_sync(ts->input_dev);
+
+ return IRQ_HANDLED;
+}
+
+static int imagis_start(struct imagis_ts *ts)
+{
+ int error;
+
+ error = regulator_bulk_enable(ARRAY_SIZE(ts->supplies),
+ ts->supplies);
+ if (error) {
+ dev_err(&ts->client->dev,
+ "Failed to enable regulators: %d\n", error);
+ return error;
+ }
+
+ msleep(IST3038C_CHIP_ON_DELAY);
+
+ enable_irq(ts->client->irq);
+ return 0;
+}
+
+static int imagis_stop(struct imagis_ts *ts)
+{
+ int error = 0;
+
+ disable_irq(ts->client->irq);
+
+ error = regulator_bulk_disable(ARRAY_SIZE(ts->supplies),
+ ts->supplies);
+ if (error)
+ dev_err(&ts->client->dev,
+ "Failed to disable regulators: %d\n", error);
+ return error;
+}
+
+static int imagis_input_open(struct input_dev *dev)
+{
+ struct imagis_ts *ts = input_get_drvdata(dev);
+
+ return imagis_start(ts);
+}
+
+static void imagis_input_close(struct input_dev *dev)
+{
+ struct imagis_ts *ts = input_get_drvdata(dev);
+
+ imagis_stop(ts);
+}
+
+static int imagis_init_input_dev(struct imagis_ts *ts)
+{
+ struct input_dev *input_dev;
+ int error;
+
+ input_dev = devm_input_allocate_device(&ts->client->dev);
+ if (!input_dev)
+ return -ENOMEM;
+
+ ts->input_dev = input_dev;
+
+ input_dev->name = "Imagis capacitive touchscreen";
+ input_dev->phys = "input/ts";
+ input_dev->id.bustype = BUS_I2C;
+ input_dev->open = imagis_input_open;
+ input_dev->close = imagis_input_close;
+
+ input_set_drvdata(input_dev, ts);
+
+ input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_X);
+ input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_Y);
+ input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
+
+ touchscreen_parse_properties(input_dev, true, &ts->prop);
+ if (!ts->prop.max_x || !ts->prop.max_y) {
+ dev_err(&ts->client->dev,
+ "Touchscreen-size-x and/or touchscreen-size-y not set in dts\n");
+ return -EINVAL;
+ }
+
+ error = input_mt_init_slots(input_dev, IST3038C_MAX_SUPPORTED_FINGER_NUM,
+ INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+ if (error) {
+ dev_err(&ts->client->dev,
+ "Failed to initialize MT slots: %d", error);
+ return error;
+ }
+
+ error = input_register_device(input_dev);
+ if (error) {
+ dev_err(&ts->client->dev,
+ "Failed to register input device: %d", error);
+ return error;
+ }
+
+ return 0;
+}
+
+static int imagis_init_regulators(struct imagis_ts *ts)
+{
+ struct i2c_client *client = ts->client;
+ int error = 0;
+
+ ts->supplies[0].supply = "vdd";
+ ts->supplies[1].supply = "vddio";
+ error = devm_regulator_bulk_get(&client->dev,
+ ARRAY_SIZE(ts->supplies),
+ ts->supplies);
+
+ return error;
+}
+
+static int imagis_probe(struct i2c_client *i2c)
+{
+ struct device *dev;
+ struct imagis_ts *ts;
+ int chip_id, ret, error;
+
+ dev = &i2c->dev;
+
+ ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
+ if (!ts)
+ return -ENOMEM;
+
+ ts->client = i2c;
+
+ ret = imagis_init_regulators(ts);
+ if (ret)
+ return dev_err_probe(dev, ret, "regulator init error: %d\n", ret);
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(ts->supplies),
+ ts->supplies);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to enable regulators: %d\n", ret);
+
+ msleep(IST3038C_CHIP_ON_DELAY);
+
+ ret = imagis_i2c_read_reg(ts, IST3038C_REG_CHIPID | IST3038C_DIRECT_ACCESS, &chip_id);
+ if (ret) {
+ dev_err(dev, "chip ID read failure: %d\n", ret);
+ goto error_probe;
+ }
+
+ if (chip_id == IST3038C_WHOAMI) {
+ dev_dbg(dev, "Detected IST3038C chip\n");
+ } else {
+ dev_err(dev, "unknown chip ID: 0x%x\n", chip_id);
+ ret = -EINVAL;
+ goto error_probe;
+ }
+
+ ret = devm_request_threaded_irq(dev, i2c->irq,
+ NULL, imagis_interrupt,
+ IRQF_ONESHOT | IRQF_NO_AUTOEN,
+ "imagis-touchscreen", ts);
+ if (ret) {
+ dev_err(dev, "IRQ allocation failure: %d\n", ret);
+ goto error_probe;
+ }
+
+ ret = imagis_init_input_dev(ts);
+ if (ret) {
+ dev_err(dev, "input subsystem init error: %d\n", ret);
+ goto error_probe;
+ }
+ return 0;
+
+error_probe:
+ error = regulator_bulk_disable(ARRAY_SIZE(ts->supplies),
+ ts->supplies);
+ if (error)
+ dev_err(dev, "Failed to disable regulators: %d\n", error);
+ return ret;
+}
+
+static int __maybe_unused imagis_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct imagis_ts *ts = i2c_get_clientdata(client);
+
+ mutex_lock(&ts->input_dev->mutex);
+
+ if (input_device_enabled(ts->input_dev))
+ imagis_stop(ts);
+
+ mutex_unlock(&ts->input_dev->mutex);
+
+ return 0;
+}
+
+static int __maybe_unused imagis_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct imagis_ts *ts = i2c_get_clientdata(client);
+ int ret = 0;
+
+ mutex_lock(&ts->input_dev->mutex);
+
+ if (input_device_enabled(ts->input_dev))
+ ret = imagis_start(ts);
+
+ mutex_unlock(&ts->input_dev->mutex);
+
+ return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(imagis_pm_ops, imagis_suspend, imagis_resume);
+
+#ifdef CONFIG_OF
+static const struct of_device_id imagis_of_match[] = {
+ { .compatible = "imagis,ist3038c", },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, imagis_of_match);
+#endif
+
+static struct i2c_driver imagis_ts_driver = {
+ .driver = {
+ .name = "imagis-touchscreen",
+ .pm = &imagis_pm_ops,
+ .of_match_table = of_match_ptr(imagis_of_match),
+ },
+ .probe_new = imagis_probe,
+};
+
+module_i2c_driver(imagis_ts_driver);
+
+MODULE_DESCRIPTION("Imagis IST3038C Touchscreen Driver");
+MODULE_AUTHOR("Markuss Broks <markuss.broks@gmail.com>");
+MODULE_LICENSE("GPL");
--
2.35.0
\
 
 \ /
  Last update: 2022-02-16 14:44    [W:0.132 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site