lkml.org 
[lkml]   [2022]   [Feb]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 2/3] dt-bindings: interrupt-controller: Add Qualcomm MPM support
Date
It adds DT binding support for Qualcomm MPM interrupt controller.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
.../interrupt-controller/qcom,mpm.yaml | 94 +++++++++++++++++++
1 file changed, 94 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml

diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml b/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml
new file mode 100644
index 000000000000..374ef155f45c
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/qcom,mpm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcom MPM Interrupt Controller
+
+maintainers:
+ - Shawn Guo <shawn.guo@linaro.org>
+
+description:
+ Qualcomm Technologies Inc. SoCs based on the RPM architecture have a
+ MSM Power Manager (MPM) that is in always-on domain. In addition to managing
+ resources during sleep, the hardware also has an interrupt controller that
+ monitors the interrupts when the system is asleep, wakes up the APSS when
+ one of these interrupts occur and replays it to GIC interrupt controller
+ after GIC becomes operational.
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: qcom,mpm
+
+ reg:
+ maxItems: 1
+ description:
+ Specifies the base address and size of vMPM registers in RPM MSG RAM.
+
+ interrupts:
+ maxItems: 1
+ description:
+ Specify the IRQ used by RPM to wakeup APSS.
+
+ mboxes:
+ maxItems: 1
+ description:
+ Specify the mailbox used to notify RPM for writing vMPM registers.
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+ description:
+ The first cell is the MPM pin number for the interrupt, and the second
+ is the trigger type.
+
+ qcom,mpm-pin-count:
+ maxItems: 1
+ description:
+ Specify the total MPM pin count that a SoC supports.
+
+ qcom,mpm-pin-map:
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ items:
+ - description: MPM pin number
+ - description: GIC SPI number for the MPM pin
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - mboxes
+ - interrupt-controller
+ - '#interrupt-cells'
+ - qcom,mpm-pin-count
+ - qcom,mpm-pin-map
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ mpm: interrupt-controller@45f01b8 {
+ compatible = "qcom,qcm2290-mpm";
+ interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+ reg = <0x45f01b8 0x1000>;
+ mboxes = <&apcs_glb 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ qcom,mpm-pin-count = <96>;
+ qcom,mpm-pin-map = <2 275>,
+ <5 296>,
+ <12 422>,
+ <24 79>,
+ <86 183>,
+ <90 260>,
+ <91 260>;
+ };
--
2.17.1
\
 
 \ /
  Last update: 2022-02-16 14:29    [W:0.619 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site