Messages in this thread Patch in this message | | | From | Jerry Ray <> | Subject | [PATCH net-next v5 5/6] dsa: lan9303: Determine CPU port based on dsa_switch ptr | Date | Fri, 9 Dec 2022 16:47:12 -0600 |
| |
In preparing to move the adjust_link logic into the phylink_mac_link_up api, change the macro used to check for the cpu port.
Signed-off-by: Jerry Ray <jerry.ray@microchip.com> --- drivers/net/dsa/lan9303-core.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c index 694249aa1f19..1d22e4b74308 100644 --- a/drivers/net/dsa/lan9303-core.c +++ b/drivers/net/dsa/lan9303-core.c @@ -1064,7 +1064,11 @@ static void lan9303_adjust_link(struct dsa_switch *ds, int port, struct lan9303 *chip = ds->priv; int ctl; - if (!phy_is_pseudo_fixed_link(phydev)) + /* On this device, we are only interested in doing something here if + * this is the CPU port. All other ports are 10/100 phys using MDIO + * to control there link settings. + */ + if (!dsa_is_cpu_port(ds, port)) return; ctl = lan9303_phy_read(ds, port, MII_BMCR); -- 2.17.1
| |