lkml.org 
[lkml]   [2022]   [Dec]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[RFC PATCH v2 0/3] Add reset control for mfd syscon devices
Date
This RFC series adds a facility for syscon devices to control a reset
line when probed; we have instances of simple register-only syscon
resources that need deassertion of a reset line for the register set to
be accessible.

Rather than requiring a specific driver to implement this, it'd be nice
to use the generic syscon device and the generic resets linkage to do
so.

Any comments/queries/etc are most welcome.

Cheers,


Jeremy
---
v2:
* do reset control in the early of_syscon_register() path, rather than
the platform device init, which isn't used.
* consequently, add regmap infrastructure to attach a reset
controller, in a similar way to attaching clocks

Jeremy Kerr (3):
dt-bindings: mfd/syscon: Add resets property
regmap: mmio: allow reset control in a MMIO regmap
mfd: syscon: allow reset control for syscon devices

.../devicetree/bindings/mfd/syscon.yaml | 3 +++
drivers/base/regmap/regmap-mmio.c | 22 +++++++++++++++
drivers/mfd/syscon.c | 27 ++++++++++++++-----
include/linux/regmap.h | 3 +++
4 files changed, 49 insertions(+), 6 deletions(-)

--
2.35.1

\
 
 \ /
  Last update: 2022-12-09 02:34    [W:0.663 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site