lkml.org 
[lkml]   [2022]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3] arm64: dts: qcom: sa8540p-ride: enable PCIe support
Date
On Fri, 2 Dec 2022 07:09:18 -0500, Brian Masney wrote:
> Add the vreg_l11a, pcie3a, pcie3a_phy, and tlmm nodes that are necessary
> in order to get PCIe working on the QDrive3.
>
> This patch also increases the width of the ranges property for the PCIe
> switch that's found on this platform. Note that this change requires
> the latest trustzone (TZ) firmware that's available from Qualcomm as
> of November 2022. If this is used against a board with the older
> firmware, then the board will go into ramdump mode when PCIe is probed
> on startup.
>
> [...]

Applied, thanks!

[1/1] arm64: dts: qcom: sa8540p-ride: enable PCIe support
commit: b8bf63f8eb728dc9cb0ae0ee921eb889a11186cb

Best regards,
--
Bjorn Andersson <andersson@kernel.org>

\
 
 \ /
  Last update: 2022-12-06 19:20    [W:0.112 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site