lkml.org 
[lkml]   [2022]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 14/15] can: tcan4x5x: Fix register range of first block
Hi Marc,

On Fri, Dec 02, 2022 at 03:28:10PM +0100, Marc Kleine-Budde wrote:
> On 16.11.2022 21:53:07, Markus Schneider-Pargmann wrote:
> > According to the datasheet 0x1c is the last register in the first block,
> > not register 0x2c.
>
> The datasheet "SLLSF91A – DECEMBER 2018 – REVISED JANUARY 2020" says:
>
> | 8.6.1 Device ID and Interrupt/Diagnostic Flag Registers: 16'h0000 to
> | 16'h002F
>
> While the last described register is at 0xc.

Sorry, not sure what I looked up here. The last described register is
0x10 SPI Error status mask in my datasheet:
'SLLSEZ5D – JANUARY 2018 – REVISED JUNE 2022'

I would prefer using the actual registers if that is ok with you, so
0x10 here because I assume the remaining registers have internal use or
maybe don't exist at all?! If there is an undocumented register that
needs to be used at some point we can still modify the ranges.

Also it seems the existing ranges are following the same logic and don't
list the whole range, just the documented registers.

The second range is wrong as well. The last register is 0x830, will fix.

Best,
Markus

\
 
 \ /
  Last update: 2022-12-05 10:33    [W:0.065 / U:0.564 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site