lkml.org 
[lkml]   [2022]   [Dec]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH RFC 4/8] fs: Introduce FALLOC_FL_PROVISION
On Thu, Sep 22, 2022 at 11:29 AM Brian Foster <bfoster@redhat.com> wrote:
>
> On Thu, Sep 22, 2022 at 01:04:33AM -0700, Sarthak Kukreti wrote:
> > On Wed, Sep 21, 2022 at 8:39 AM Brian Foster <bfoster@redhat.com> wrote:
> > >
> > > On Fri, Sep 16, 2022 at 02:02:31PM -0700, Sarthak Kukreti wrote:
> > > > On Fri, Sep 16, 2022 at 4:56 AM Brian Foster <bfoster@redhat.com> wrote:
> > > > >
> > > > > On Thu, Sep 15, 2022 at 09:48:22AM -0700, Sarthak Kukreti wrote:
> > > > > > From: Sarthak Kukreti <sarthakkukreti@chromium.org>
> > > > > >
> > > > > > FALLOC_FL_PROVISION is a new fallocate() allocation mode that
> > > > > > sends a hint to (supported) thinly provisioned block devices to
> > > > > > allocate space for the given range of sectors via REQ_OP_PROVISION.
> > > > > >
> > > > > > Signed-off-by: Sarthak Kukreti <sarthakkukreti@chromium.org>
> > > > > > ---
> > > > > > block/fops.c | 7 ++++++-
> > > > > > include/linux/falloc.h | 3 ++-
> > > > > > include/uapi/linux/falloc.h | 8 ++++++++
> > > > > > 3 files changed, 16 insertions(+), 2 deletions(-)
> > > > > >
> > > > > > diff --git a/block/fops.c b/block/fops.c
> > > > > > index b90742595317..a436a7596508 100644
> > > > > > --- a/block/fops.c
> > > > > > +++ b/block/fops.c
> > > > > ...
> > > > > > @@ -661,6 +662,10 @@ static long blkdev_fallocate(struct file *file, int mode, loff_t start,
> > > > > > error = blkdev_issue_discard(bdev, start >> SECTOR_SHIFT,
> > > > > > len >> SECTOR_SHIFT, GFP_KERNEL);
> > > > > > break;
> > > > > > + case FALLOC_FL_PROVISION:
> > > > > > + error = blkdev_issue_provision(bdev, start >> SECTOR_SHIFT,
> > > > > > + len >> SECTOR_SHIFT, GFP_KERNEL);
> > > > > > + break;
> > > > > > default:
> > > > > > error = -EOPNOTSUPP;
> > > > > > }
> > > > >
> > > > > Hi Sarthak,
> > > > >
> > > > > Neat mechanism.. I played with something very similar in the past (that
> > > > > was much more crudely hacked up to target dm-thin) to allow filesystems
> > > > > to request a thinly provisioned device to allocate blocks and try to do
> > > > > a better job of avoiding inactivation when overprovisioned.
> > > > >
> > > > > One thing I'm a little curious about here.. what's the need for a new
> > > > > fallocate mode? On a cursory glance, the provision mode looks fairly
> > > > > analogous to normal (mode == 0) allocation mode with the exception of
> > > > > sending the request down to the bdev. blkdev_fallocate() already maps
> > > > > some of the logical falloc modes (i.e. punch hole, zero range) to
> > > > > sending write sames or discards, etc., and it doesn't currently look
> > > > > like it supports allocation mode, so could it not map such requests to
> > > > > the underlying REQ_OP_PROVISION op?
> > > > >
> > > > > I guess the difference would be at the filesystem level where we'd
> > > > > probably need to rely on a mount option or some such to control whether
> > > > > traditional fallocate issues provision ops (like you've implemented for
> > > > > ext4) vs. the specific falloc command, but that seems fairly consistent
> > > > > with historical punch hole/discard behavior too. Hm? You might want to
> > > > > cc linux-fsdevel in future posts in any event to get some more feedback
> > > > > on how other filesystems might want to interact with such a thing.
> > > > >
> > > > Thanks for the feedback!
> > > > Argh, I completely forgot that I should add linux-fsdevel. Let me
> > > > re-send this with linux-fsdevel cc'd
> > > >
> > > > There's a slight distinction is that the current filesystem-level
> > > > controls are usually for default handling, but userspace can still
> > > > call the relevant functions manually if they need to. For example, for
> > > > ext4, the 'discard' mount option dictates whether free blocks are
> > > > discarded, but it doesn't set the policy to allow/disallow userspace
> > > > from manually punching holes into files even if the mount opt is
> > > > 'nodiscard'. FALLOC_FL_PROVISION is similar in that regard; it adds a
> > > > manual mechanism for users to provision the files' extents, that is
> > > > separate from the filesystems' default handling of provisioning files.
> > > >
> > >
> > > What I'm trying to understand is why not let blkdev_fallocate() issue a
> > > provision based on the default mode (i.e. mode == 0) of fallocate(),
> > > which is already defined to mean "perform allocation?" It currently
> > > issues discards or write zeroes based on variants of
> > > FALLOC_FL_PUNCH_HOLE without the need for a separate FALLOC_FL_DISCARD
> > > mode, for example.
> > >
> > It's mostly to keep the block device fallocate() semantics in-line and
> > consistent with the file-specific modes: I added the separate
> > filesystem fallocate() mode under the assumption that we'd want to
> > keep the traditional handling for filesystems intact with (mode == 0).
> > And for block devices, I didn't map the requests to mode == 0 so that
> > it's less confusing to describe (eg. mode == 0 on block devices will
> > issue provision; mode == 0 on files will not). It would complicate
> > loopback devices, for instance; if the loop device is backed by a
> > file, it would need to use (mode == FALLOC_FL_PROVISION) but if the
> > loop device is backed by another block device, then the fallocate()
> > call would need to switch to (mode == 0).
> >
>
> I would expect the loopback scenario for provision to behave similar to
> how discards are handled. I.e., loopback receives a provision request
> and translates that to fallocate(mode = 0). If the backing device is
> block, blkdev_fallocate(mode = 0) translates that to another provision
> request. If the backing device is a file, the associated fallocate
> handler allocs/maps, if necessary, and then issues a provision on
> allocation, if enabled by the fs.
>
> AFAICT there's no need for FL_PROVISION at all in that scenario. Is
> there a functional purpose to FL_PROVISION? Is the intent to try and
> guarantee that a provision request propagates down the I/O stack? If so,
> what happens if blocks were already preallocated in the backing file (in
> the loopback file example)?
>
> BTW, an unrelated thing I noticed is that blkdev_fallocate()
> unconditionally calls truncate_bdev_range(), which probably doesn't make
> sense for any sort of alloc mode.
>
Thanks for pointing that out, fixed in v2.

> > With the separate mode, we can describe the semantics of falllcate()
> > modes a bit more cleanly, and it is common for both files and block
> > devices:
> >
> > 1. mode == 0: allocation at the same layer, will not provision on the
> > underlying device/filesystem (unsupported for block devices).
> > 2. mode == FALLOC_FL_PROVISION, allocation at the layer, will
> > provision on the underlying device/filesystem.
> >
>
> I think I see why you make the distinction, since the block layer
> doesn't have a "this layer only" mode, but IMO it's also quite confusing
> to say that mode == FL_PROVISION can allocate at the current and
> underlying layer(s) but mode == 0 to that underlying layer cannot.
>
> Either way, if you want to propose a new falloc mode/modifier, it
> probably warrants a more detailed commit log with more explanation of
> the purpose, examples of behavior, perhaps some details on how the mode
> might be documented in man pages, etc.
>
That's fair. Added more details to the patch commit log in v2.

Thanks
Sarthak

> Brian
>
> > Block devices don't technically need to use a separate mode, but it
> > makes it much less confusing if filesystems are already using a
> > separate mode for provision.
> >
> > Best
> > Sarthak
> >
> > > Brian
> > >
> > > > > BTW another thing that might be useful wrt to dm-thin is to support
> > > > > FALLOC_FL_UNSHARE. I.e., it looks like the previous dm-thin patch only
> > > > > checks that blocks are allocated, but not whether those blocks are
> > > > > shared (re: lookup_result.shared). It might be useful to do the COW in
> > > > > such cases if the caller passes down a REQ_UNSHARE or some such flag.
> > > > >
> > > > That's an interesting idea! There's a few more things on the TODO list
> > > > for this patch series but I think we can follow up with a patch to
> > > > handle that as well.
> > > >
> > > > Sarthak
> > > >
> > > > > Brian
> > > > >
> > > > > > diff --git a/include/linux/falloc.h b/include/linux/falloc.h
> > > > > > index f3f0b97b1675..a0e506255b20 100644
> > > > > > --- a/include/linux/falloc.h
> > > > > > +++ b/include/linux/falloc.h
> > > > > > @@ -30,7 +30,8 @@ struct space_resv {
> > > > > > FALLOC_FL_COLLAPSE_RANGE | \
> > > > > > FALLOC_FL_ZERO_RANGE | \
> > > > > > FALLOC_FL_INSERT_RANGE | \
> > > > > > - FALLOC_FL_UNSHARE_RANGE)
> > > > > > + FALLOC_FL_UNSHARE_RANGE | \
> > > > > > + FALLOC_FL_PROVISION)
> > > > > >
> > > > > > /* on ia32 l_start is on a 32-bit boundary */
> > > > > > #if defined(CONFIG_X86_64)
> > > > > > diff --git a/include/uapi/linux/falloc.h b/include/uapi/linux/falloc.h
> > > > > > index 51398fa57f6c..2d323d113eed 100644
> > > > > > --- a/include/uapi/linux/falloc.h
> > > > > > +++ b/include/uapi/linux/falloc.h
> > > > > > @@ -77,4 +77,12 @@
> > > > > > */
> > > > > > #define FALLOC_FL_UNSHARE_RANGE 0x40
> > > > > >
> > > > > > +/*
> > > > > > + * FALLOC_FL_PROVISION acts as a hint for thinly provisioned devices to allocate
> > > > > > + * blocks for the range/EOF.
> > > > > > + *
> > > > > > + * FALLOC_FL_PROVISION can only be used with allocate-mode fallocate.
> > > > > > + */
> > > > > > +#define FALLOC_FL_PROVISION 0x80
> > > > > > +
> > > > > > #endif /* _UAPI_FALLOC_H_ */
> > > > > > --
> > > > > > 2.31.0
> > > > > >
> > > > >
> > > >
> > >
> >
>

\
 
 \ /
  Last update: 2023-03-26 23:22    [W:0.122 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site