lkml.org 
[lkml]   [2022]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 1/2] Documentation: dt-bindings: k3-r5f-rproc: Add new compatible for AM62 SoC family
From
Hi Krzysztof,

On 21/12/22 15:06, Krzysztof Kozlowski wrote:
> On 21/12/2022 08:42, Devarsh Thakkar wrote:
>> Hi Krzysztof,
>>
>> Thanks for the review. Please find my response inline.
>>
>> On 30/11/22 20:33, Krzysztof Kozlowski wrote:
>>> On 30/11/2022 14:40, Devarsh Thakkar wrote:
>>>> AM62 family of devices don't have a R5F cluster, instead
>>>> they have single core DM R5F.
>>>> Add new compatible string ti,am62-r5fss to support this scenario.
>>>>
>>>> When this new compatible is used don't allow cluster-mode
>>>> property usage in device-tree as this implies that there
>>>> is no R5F cluster available and only single R5F core
>>>> is present.
>>>>
>>>> Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
>>>> ---
>>>> V2: Avoid acronyms, use "Device Manager" instead of "DM"
>>>
>>> Use subject prefixes matching the subsystem (git log --oneline -- ...).
>> Agreed, I will update the prefix as dt-bindings: remoteproc: k3-r5f: in V3.
>>>
>>>> ---
>>>> .../bindings/remoteproc/ti,k3-r5f-rproc.yaml | 48 +++++++++++++------
>>>> 1 file changed, 34 insertions(+), 14 deletions(-)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
>>>> index fb9605f0655b..91357635025a 100644
>>>> --- a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
>>>> +++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
>>>> @@ -21,6 +21,9 @@ description: |
>>>> called "Single-CPU" mode, where only Core0 is used, but with ability to use
>>>> Core1's TCMs as well.
>>>>
>>>> + AM62 SoC family support a single R5F core only which runs Device Manager
>>>> + firmware and can also be used as a remote processor with IPC communication.
>>>> +
>>>> Each Dual-Core R5F sub-system is represented as a single DTS node
>>>> representing the cluster, with a pair of child DT nodes representing
>>>> the individual R5F cores. Each node has a number of required or optional
>>>> @@ -28,6 +31,9 @@ description: |
>>>> the device management of the remote processor and to communicate with the
>>>> remote processor.
>>>>
>>>> + Since AM62 SoC family only support a single core, there is no cluster-mode
>>>> + property setting required for it.
>>>> +
>>>> properties:
>>>> $nodename:
>>>> pattern: "^r5fss(@.*)?"
>>>> @@ -38,6 +44,7 @@ properties:
>>>> - ti,j721e-r5fss
>>>> - ti,j7200-r5fss
>>>> - ti,am64-r5fss
>>>> + - ti,am62-r5fss
>>>
>>> Some order? Alphabetical, so before am64? Same in other places.
>> Agreed, I will update in V3 accordingly.
>>>
>>>
>>>> - ti,j721s2-r5fss
>>>>
>>>> power-domains:
>>>> @@ -80,7 +87,8 @@ patternProperties:
>>>> node representing a TI instantiation of the Arm Cortex R5F core. There
>>>> are some specific integration differences for the IP like the usage of
>>>> a Region Address Translator (RAT) for translating the larger SoC bus
>>>> - addresses into a 32-bit address space for the processor.
>>>> + addresses into a 32-bit address space for the processor. For AM62x,
>>>> + should only define one R5F child node as it has only one core available.
>>>>
>>>> Each R5F core has an associated 64 KB of Tightly-Coupled Memory (TCM)
>>>> internal memories split between two banks - TCMA and TCMB (further
>>>> @@ -104,6 +112,7 @@ patternProperties:
>>>> - ti,j721e-r5f
>>>> - ti,j7200-r5f
>>>> - ti,am64-r5f
>>>> + - ti,am62-r5f
>>>> - ti,j721s2-r5f
>>>>
>>>> reg:
>>>> @@ -207,20 +216,31 @@ patternProperties:
>>>> - firmware-name
>>>>
>>>> unevaluatedProperties: false
>>>
>>> Blank line.
>> Agreed, I will remove it in V3.
>>>
>>>> +allOf:
>>>> + - if:
>>>> + properties:
>>>> + compatible:
>>>> + enum:
>>>> + - ti,am64-r5fss
>>>> + then:
>>>> + properties:
>>>> + ti,cluster-mode:
>>>> + enum: [0, 2]
>>>> +
>>>> + else:
>>>> + properties:
>>>> + ti,cluster-mode:
>>>
>>> It's not really valid anymore for ti,am62-r5fss, so this cannot be
>>> simple "else". Instead you need to list all compatibles.
>> I agree that the else block is not valid for am62x, but my understanding is that since all the blocks under allOf are checked for validity,
>> I thought to add a separate if block only for am62x to set cluster-mode to false [1], which I believe would negate the effect of above else condition for am62x,
>> so that we don't have to list all compatibles under separate if blocks.
>>
>> Just to verify this, I deliberately set cluster-mode=1 in am62x devicetree and then ran a dtbs-check and got below log :
[2]
>> "linux-next/arch/arm64/boot/dts/ti/k3-am625-sk.dtb: r5fss@78000000: ti,cluster-mode: False schema does not allow [[1]]"
>>
>> and above warning log goes away when i remove the cluster-mode node in am62x devicetree.
>> But please do let me know if I am missing something here or there is a better/more proper way to do this.
>
> This was three weeks ago, so hundreds of patches ago, I don't remember
> anymore.
My apologies for the delay.
>
> Just look at your patch - it is clearly incorrect. You said in the patch
> that for compatibles other than ti,am64-r5fss cluster mode is BOTH [0,
> 1] AND false.

cluster-mode is BOTH [0,1] and false only in case of AM62x as per below snippet, but since it's under allOf the impact of latter will supersede, schema validation will fail even if cluster-mode set to 0 or 1 for am62x due to below snippet as shared in obesrvation log above [2].

" - if:
properties:
compatible:
enum:
- ti,am62-r5fss
then:
properties:
ti,cluster-mode: false"

Sorry for the back and forth, I just thought to describe more clearly what I was up-to as I thought above should be functionally fine and it also saves us from having separate if blocks for each compatible, but I am open to adding separate if blocks as you earlier suggested if that seems more cleaner solution.

Best Regards,
Devarsh
>
> I gave you the way to fix it. Feel free to fix it other ways if it gives
> correct result.
>
> Best regards,
> Krzysztof
>

\
 
 \ /
  Last update: 2023-03-26 23:17    [W:0.129 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site