lkml.org 
[lkml]   [2022]   [Dec]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v6 0/3] arm64: dts: qcom: sm8450-hdk: add sound support
Date
Hi,

Changes since v5
================
1. Patch 2:
- Use different clocks (codec@31e0000, codec@3240000).
- Order LPASS pinctrl nodes by GPIO number.
- Add dmic01-default-state and dmic02-default-state to LPASS pinctrl.
2. Patch 3:
- Use TX_CODEC_DMA_TX_3 for VA capture.
- Reverse order of speakers (left/right).
- Drop duplicated wcd-playback-dai-link and add wcd-capture-dai-link.

Changes since v4
================
1. Patch 2:
- Re-order few properties between Soundwire nodes, to keep them ordered
consistently.
- Drop unsupported qcom,port-offset.

Changes since v3
================
1. Re-order reg and sound-dai-cells.

Changes since v2
================
1. Patch 2: Use lower-case hex.
2. Patch 3: Use ACTIVE_LOW for qcom,wcd9380-codec reset-gpios.
https://lore.kernel.org/all/20221116053817.2929810-11-dmitry.torokhov@gmail.com
3. Add Rb tags.

Changes since v1
================
1. Patch 2:
- Whitespace cleanups.
- Correct include - do not use deprecated one.
2. Patch 3:
- Sort.
- Add Rb tag.
- Correct include - do not use deprecated one and drop q6asm.h (not used).

Description
===========
Initial work (still partially in progress) adding audio to HDK8450 board.

Working/tested:
- speakers
- one channel of headset

The DTS patches do not have particular dependencies, however they:
1. Use updated ASoC bindings:
https://lore.kernel.org/linux-arm-msm/20221111113547.100442-1-krzysztof.kozlowski@linaro.org/T/#t

2. For full operation need changes in Soundwire and Qualcomm ASoC drivers, not
yet upstreamed:
https://github.com/krzk/linux/commits/wip/sm8450
Booting remoteproc without these changes will report errors, but these are
expected at this stage.

Best regards,
Krzysztof

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

Srinivas Kandagatla (3):
arm64: dts: qcom: sm8450: add GPR node
arm64: dts: qcom: sm8450: add Soundwire and LPASS
arm64: dts: qcom: sm8450-hdk: add sound support

arch/arm64/boot/dts/qcom/sm8450-hdk.dts | 186 ++++++++++++
arch/arm64/boot/dts/qcom/sm8450.dtsi | 364 ++++++++++++++++++++++++
2 files changed, 550 insertions(+)

--
2.34.1

\
 
 \ /
  Last update: 2022-12-02 16:22    [W:0.048 / U:0.996 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site