[lkml]   [2022]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH 0/3] Qcom: Add GIC-ITS support to SM8450 PCIe controllers

This series adds GIC-ITS support to SM8450 PCIe controllers for receiving
the MSIs from endpoint devices.

The GIC-ITS MSI implementation provides an advantage over internal MSI
implementation using Locality-specific Peripheral Interrupts (LPI) that
would allow MSIs to be targeted for each CPU core.

This series has been tested on SM8450 based dev board that works using an
out-of-tree dts where the MSIs from endpoint devices are distributed across
the CPU cores.


Manivannan Sadhasivam (3):
dt-bindings: PCI: qcom: Update maintainers
dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties
arm64: dts: qcom: sm8450: Use GIC-ITS for PCIe0 and PCIe1

.../devicetree/bindings/pci/qcom,pcie.yaml | 18 ++++++++++++++----
arch/arm64/boot/dts/qcom/sm8450.dtsi | 12 ++++++------
2 files changed, 20 insertions(+), 10 deletions(-)


 \ /
  Last update: 2023-03-26 23:15    [W:0.056 / U:1.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site