lkml.org 
[lkml]   [2022]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 10/15] arm64: dts: qcom: sm8450: Fix the base addresses of LLCC banks
Date
The LLCC block has several banks each with a different base address
and holes in between. So it is not a correct approach to cover these
banks with a single offset/size. Instead, the individual bank's base
address needs to be specified in devicetree with the exact size.

Reported-by: Parikshit Pareek <quic_ppareek@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8450.dtsi | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 570475040d95..12549a2912c6 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -3640,8 +3640,11 @@ gem_noc: interconnect@19100000 {

system-cache-controller@19200000 {
compatible = "qcom,sm8450-llcc";
- reg = <0 0x19200000 0 0x580000>, <0 0x19a00000 0 0x80000>;
- reg-names = "llcc_base", "llcc_broadcast_base";
+ reg = <0 0x19200000 0 0x80000>, <0 0x19600000 0 0x80000>,
+ <0 0x19300000 0 0x80000>, <0 0x19700000 0 0x80000>,
+ <0 0x19a00000 0 0x80000>;
+ reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
+ "llcc3_base", "llcc_broadcast_base";
interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
};

--
2.25.1
\
 
 \ /
  Last update: 2022-12-19 19:33    [W:0.197 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site