lkml.org 
[lkml]   [2022]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/7] spi: cadence: Add polling mode support
Date
If IRQ is not configured, switch driver to polling
mode instead of returning with error.
Code is using SDMA interrupt flag to determine
SDMA operation status, and stig ready flag to
determine stig engine readiness.

Signed-off-by: Witold Sadowski <wsadowski@marvell.com>
Reviewed-by: Chandrakala Chavva <cchavva@marvell.com>
Reviewed-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
---
drivers/spi/spi-cadence-xspi.c | 66 +++++++++++++++++++++++++++-------
1 file changed, 53 insertions(+), 13 deletions(-)

diff --git a/drivers/spi/spi-cadence-xspi.c b/drivers/spi/spi-cadence-xspi.c
index 91db3c973167..25db0d55d5ef 100644
--- a/drivers/spi/spi-cadence-xspi.c
+++ b/drivers/spi/spi-cadence-xspi.c
@@ -190,6 +190,9 @@
((op)->data.dir == SPI_MEM_DATA_IN) ? \
CDNS_XSPI_STIG_CMD_DIR_READ : CDNS_XSPI_STIG_CMD_DIR_WRITE))

+#define CDNS_XSPI_POLL_TIMEOUT_US 1000
+#define CDNS_XSPI_POLL_DELAY_US 10
+
enum cdns_xspi_stig_instr_type {
CDNS_XSPI_STIG_INSTR_TYPE_0,
CDNS_XSPI_STIG_INSTR_TYPE_1,
@@ -293,6 +296,9 @@ static void cdns_xspi_set_interrupts(struct cdns_xspi_dev *cdns_xspi,
{
u32 intr_enable;

+ if (!cdns_xspi->irq)
+ return;
+
intr_enable = readl(cdns_xspi->iobase + CDNS_XSPI_INTR_ENABLE_REG);
if (enabled)
intr_enable |= CDNS_XSPI_INTR_MASK;
@@ -345,6 +351,28 @@ static void cdns_xspi_sdma_handle(struct cdns_xspi_dev *cdns_xspi)
}
}

+bool cdns_xspi_stig_ready(struct cdns_xspi_dev *cdns_xspi)
+{
+ u32 ctrl_stat;
+
+ return readl_relaxed_poll_timeout
+ (cdns_xspi->iobase + CDNS_XSPI_CTRL_STATUS_REG,
+ ctrl_stat,
+ ((ctrl_stat & BIT(3)) == 0),
+ CDNS_XSPI_POLL_DELAY_US, CDNS_XSPI_POLL_TIMEOUT_US);
+}
+
+bool cdns_xspi_sdma_ready(struct cdns_xspi_dev *cdns_xspi)
+{
+ u32 ctrl_stat;
+
+ return readl_relaxed_poll_timeout
+ (cdns_xspi->iobase + CDNS_XSPI_INTR_STATUS_REG,
+ ctrl_stat,
+ (ctrl_stat & CDNS_XSPI_SDMA_TRIGGER),
+ CDNS_XSPI_POLL_DELAY_US, CDNS_XSPI_POLL_TIMEOUT_US);
+}
+
static int cdns_xspi_send_stig_command(struct cdns_xspi_dev *cdns_xspi,
const struct spi_mem_op *op,
bool data_phase)
@@ -385,16 +413,26 @@ static int cdns_xspi_send_stig_command(struct cdns_xspi_dev *cdns_xspi,

cdns_xspi_trigger_command(cdns_xspi, cmd_regs);

- wait_for_completion(&cdns_xspi->sdma_complete);
- if (cdns_xspi->sdma_error) {
- cdns_xspi_set_interrupts(cdns_xspi, false);
- return -EIO;
+ if (cdns_xspi->irq) {
+ wait_for_completion(&cdns_xspi->sdma_complete);
+ if (cdns_xspi->sdma_error) {
+ cdns_xspi_set_interrupts(cdns_xspi, false);
+ return -EIO;
+ }
+ } else {
+ if (cdns_xspi_sdma_ready(cdns_xspi))
+ return -EIO;
}
cdns_xspi_sdma_handle(cdns_xspi);
}

- wait_for_completion(&cdns_xspi->cmd_complete);
- cdns_xspi_set_interrupts(cdns_xspi, false);
+ if (cdns_xspi->irq) {
+ wait_for_completion(&cdns_xspi->cmd_complete);
+ cdns_xspi_set_interrupts(cdns_xspi, false);
+ } else {
+ if (cdns_xspi_stig_ready(cdns_xspi))
+ return -EIO;
+ }

cmd_status = cdns_xspi_check_command_status(cdns_xspi);
if (cmd_status)
@@ -580,13 +618,15 @@ static int cdns_xspi_probe(struct platform_device *pdev)

cdns_xspi->irq = platform_get_irq(pdev, 0);
if (cdns_xspi->irq < 0)
- return -ENXIO;
-
- ret = devm_request_irq(dev, cdns_xspi->irq, cdns_xspi_irq_handler,
- IRQF_SHARED, pdev->name, cdns_xspi);
- if (ret) {
- dev_err(dev, "Failed to request IRQ: %d\n", cdns_xspi->irq);
- return ret;
+ cdns_xspi->irq = 0;
+
+ if (cdns_xspi->irq) {
+ ret = devm_request_irq(dev, cdns_xspi->irq, cdns_xspi_irq_handler,
+ IRQF_SHARED, pdev->name, cdns_xspi);
+ if (ret) {
+ dev_err(dev, "Failed to request IRQ: %d\n", cdns_xspi->irq);
+ return ret;
+ }
}

cdns_xspi_print_phy_config(cdns_xspi);
--
2.17.1
\
 
 \ /
  Last update: 2022-12-19 15:44    [W:0.111 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site