lkml.org 
[lkml]   [2022]   [Dec]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3 4/8] ARM: dts: at91: sam9x60: Specify the FIFO size for the Flexcom UART
Date
On 13.12.2022 14:06, Durai Manickam KR wrote:
> From: Manikandan Muralidharan <manikandan.m@microchip.com>
>
> The UART submodule in Flexcom has 16-byte Transmit and Receive FIFOs.
>
> Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>

your sob should go here.

> ---
> arch/arm/boot/dts/sam9x60.dtsi | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi
> index 9a5dcf8a2b74..94cbf2aec918 100644
> --- a/arch/arm/boot/dts/sam9x60.dtsi
> +++ b/arch/arm/boot/dts/sam9x60.dtsi
> @@ -208,6 +208,7 @@ AT91_XDMAC_DT_PER_IF(1) |
> clock-names = "usart";
> atmel,use-dma-rx;
> atmel,use-dma-tx;
> + atmel,fifo-size = <16>;
> status = "disabled";
> };
> };

\
 
 \ /
  Last update: 2022-12-16 10:40    [W:2.657 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site