lkml.org 
[lkml]   [2022]   [Dec]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 5/6] arm64: dts: qcom: msm8976: Declare and use SDC2 pins
From


On 15.12.2022 00:20, Marijn Suijten wrote:
> Add the pinctrl states for SDC2 and use them on sdhc_2 to support SD
> Cards on the currently mainlined Sony Loire platform.
>
> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
> ---
> .../qcom/msm8956-sony-xperia-loire-kugo.dts | 6 +++
> .../dts/qcom/msm8956-sony-xperia-loire.dtsi | 6 +++
> arch/arm64/boot/dts/qcom/msm8976.dtsi | 45 +++++++++++++++++++
> 3 files changed, 57 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts
> index 3fb8e23e4330..9178943e2ee1 100644
> --- a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts
> @@ -33,3 +33,9 @@ &pm8950_l1 {
> regulator-min-microvolt = <1100000>;
> regulator-max-microvolt = <1300000>;
> };
> +
> +&sdc2_on_state {
> + data-pins {
> + drive-strength = <8>;
> + };
> +};
You can add a label to the data-pins subnode.


> diff --git a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi
> index 700583a56a0e..2253fb05f1c9 100644
> --- a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi
> @@ -264,6 +264,12 @@ &sdhc_1 {
> status = "okay";
> };
>
> +&sdc2_on_state {
> + clk-pins {
> + drive-strength = <10>;
> + };
> +};
> +
> &sdhc_2 {
> bus-width = <4>;
> cd-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
> diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi
> index 7d4c7548882c..f3371eaa2940 100644
> --- a/arch/arm64/boot/dts/qcom/msm8976.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi
> @@ -558,6 +558,46 @@ rclk-pins {
> };
> };
>
> + sdc2_off_state: sdc2-off-state {
> + clk-pins {
> + pins = "sdc2_clk";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + cmd-pins {
> + pins = "sdc2_cmd";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + data-pins {
> + pins = "sdc2_data";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> + };
> +
> + sdc2_on_state: sdc2-on-state {
> + clk-pins {
> + pins = "sdc2_clk";
> + drive-strength = <16>;
> + bias-disable;
> + };
> +
> + cmd-pins {
> + pins = "sdc2_cmd";
> + drive-strength = <10>;
> + bias-pull-up;
> + };
> +
> + data-pins {
> + pins = "sdc2_data";
> + drive-strength = <10>;
> + bias-pull-up;
> + };
> + };
> +
> spi1_default: spi0-default-state {
> spi-pins {
> pins = "gpio0", "gpio1", "gpio3";
> @@ -751,6 +791,11 @@ sdhc_2: mmc@7864000 {
> <&gcc GCC_SDCC2_APPS_CLK>,
> <&rpmcc RPM_SMD_XO_CLK_SRC>;
> clock-names = "iface", "core", "xo";
> +
> + pinctrl-0 = <&sdc2_on_state>;
> + pinctrl-1 = <&sdc2_off_state>;
> + pinctrl-names = "default", "sleep";
Ditto (prev patch)

Konrad
> +
> status = "disabled";
> };
>

\
 
 \ /
  Last update: 2022-12-15 14:21    [W:0.200 / U:0.432 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site