lkml.org 
[lkml]   [2022]   [Dec]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 2/7] arm64: dts: qcom: sc8280xp: rename qup2_i2c5 to i2c21
From


On 14.12.2022 18:11, Brian Masney wrote:
> In preparation for adding the missing SPI and I2C nodes to
> sc8280xp.dtsi, it was decided to rename all of the existing qupX_
> uart, spi, and i2c nodes to drop the qupX_ prefix. Let's go ahead
> and rename qup2_i2c5 to i2c21. Under the old name, this was the 5th
> index under qup2, which starts at index 16. Note that some nodes are
> moved in the file by this patch to preserve the expected sort order in
> the file.
>
> Signed-off-by: Brian Masney <bmasney@redhat.com>
> Link: https://lore.kernel.org/lkml/20221212182314.1902632-1-bmasney@redhat.com/
> ---
> This is a new patch that's introduced in v2.
>
> arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 90 ++++++-------
> .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 120 +++++++++---------
> arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 2 +-
> 3 files changed, 106 insertions(+), 106 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> index db273face248..0de1bdb68e2c 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> @@ -228,6 +228,43 @@ vreg_l9d: ldo9 {
> };
> };
>
> +&i2c21 {
> + clock-frequency = <400000>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c21_default>;
> +
> + status = "okay";
> +
> + touchpad@15 {
> + compatible = "hid-over-i2c";
> + reg = <0x15>;
> +
> + hid-descr-addr = <0x1>;
> + interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
> + vdd-supply = <&vreg_misc_3p3>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&tpad_default>;
> +
> + wakeup-source;
> + };
> +
> + keyboard@68 {
> + compatible = "hid-over-i2c";
> + reg = <0x68>;
> +
> + hid-descr-addr = <0x1>;
> + interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
> + vdd-supply = <&vreg_misc_3p3>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&kybd_default>;
> +
> + wakeup-source;
> + };
> +};
> +
> &pcie2a {
> perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
> wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
> @@ -326,43 +363,6 @@ &qup2 {
> status = "okay";
> };
>
> -&qup2_i2c5 {
> - clock-frequency = <400000>;
> -
> - pinctrl-names = "default";
> - pinctrl-0 = <&qup2_i2c5_default>;
> -
> - status = "okay";
> -
> - touchpad@15 {
> - compatible = "hid-over-i2c";
> - reg = <0x15>;
> -
> - hid-descr-addr = <0x1>;
> - interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
> - vdd-supply = <&vreg_misc_3p3>;
> -
> - pinctrl-names = "default";
> - pinctrl-0 = <&tpad_default>;
> -
> - wakeup-source;
> - };
> -
> - keyboard@68 {
> - compatible = "hid-over-i2c";
> - reg = <0x68>;
> -
> - hid-descr-addr = <0x1>;
> - interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
> - vdd-supply = <&vreg_misc_3p3>;
> -
> - pinctrl-names = "default";
> - pinctrl-0 = <&kybd_default>;
> -
> - wakeup-source;
> - };
> -};
> -
> &remoteproc_adsp {
> firmware-name = "qcom/sc8280xp/qcadsp8280.mbn";
>
> @@ -494,6 +494,14 @@ hastings_reg_en: hastings-reg-en-state {
> &tlmm {
> gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
>
> + i2c21_default: i2c21-default-state {
> + pins = "gpio81", "gpio82";
> + function = "qup21";
> +
> + bias-disable;
> + drive-strength = <16>;
This is rather nitty, but other DTs usually do

pins
function
drive-strength
bias-
in/output-


I see this patch just moves things around, but if you were to
send a v(n+1), please consider shuffling these properties
around.

Regardless of that:

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
> + };
> +
> kybd_default: kybd-default-state {
> disable-pins {
> pins = "gpio102";
> @@ -598,14 +606,6 @@ qup0_i2c4_default: qup0-i2c4-default-state {
> drive-strength = <16>;
> };
>
> - qup2_i2c5_default: qup2-i2c5-default-state {
> - pins = "gpio81", "gpio82";
> - function = "qup21";
> -
> - bias-disable;
> - drive-strength = <16>;
> - };
> -
> tpad_default: tpad-default-state {
> int-n-pins {
> pins = "gpio182";
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> index 568c6be1ceaa..d7af2040cbcb 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> @@ -282,6 +282,59 @@ vreg_l9d: ldo9 {
> };
> };
>
> +&i2c21 {
> + clock-frequency = <400000>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c21_default>;
> +
> + status = "okay";
> +
> + touchpad@15 {
> + compatible = "hid-over-i2c";
> + reg = <0x15>;
> +
> + hid-descr-addr = <0x1>;
> + interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
> + vdd-supply = <&vreg_misc_3p3>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&tpad_default>;
> +
> + wakeup-source;
> +
> + status = "disabled";
> + };
> +
> + touchpad@2c {
> + compatible = "hid-over-i2c";
> + reg = <0x2c>;
> +
> + hid-descr-addr = <0x20>;
> + interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
> + vdd-supply = <&vreg_misc_3p3>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&tpad_default>;
> +
> + wakeup-source;
> + };
> +
> + keyboard@68 {
> + compatible = "hid-over-i2c";
> + reg = <0x68>;
> +
> + hid-descr-addr = <0x1>;
> + interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
> + vdd-supply = <&vreg_misc_3p3>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&kybd_default>;
> +
> + wakeup-source;
> + };
> +};
> +
> &pcie2a {
> perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
> wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
> @@ -531,59 +584,6 @@ &qup2 {
> status = "okay";
> };
>
> -&qup2_i2c5 {
> - clock-frequency = <400000>;
> -
> - pinctrl-names = "default";
> - pinctrl-0 = <&qup2_i2c5_default>;
> -
> - status = "okay";
> -
> - touchpad@15 {
> - compatible = "hid-over-i2c";
> - reg = <0x15>;
> -
> - hid-descr-addr = <0x1>;
> - interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
> - vdd-supply = <&vreg_misc_3p3>;
> -
> - pinctrl-names = "default";
> - pinctrl-0 = <&tpad_default>;
> -
> - wakeup-source;
> -
> - status = "disabled";
> - };
> -
> - touchpad@2c {
> - compatible = "hid-over-i2c";
> - reg = <0x2c>;
> -
> - hid-descr-addr = <0x20>;
> - interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
> - vdd-supply = <&vreg_misc_3p3>;
> -
> - pinctrl-names = "default";
> - pinctrl-0 = <&tpad_default>;
> -
> - wakeup-source;
> - };
> -
> - keyboard@68 {
> - compatible = "hid-over-i2c";
> - reg = <0x68>;
> -
> - hid-descr-addr = <0x1>;
> - interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
> - vdd-supply = <&vreg_misc_3p3>;
> -
> - pinctrl-names = "default";
> - pinctrl-0 = <&kybd_default>;
> -
> - wakeup-source;
> - };
> -};
> -
> &remoteproc_adsp {
> firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcadsp8280.mbn";
>
> @@ -698,6 +698,13 @@ hall_int_n_default: hall-int-n-state {
> bias-disable;
> };
>
> + i2c21_default: i2c21-default-state {
> + pins = "gpio81", "gpio82";
> + function = "qup21";
> + bias-disable;
> + drive-strength = <16>;
> + };
> +
> kybd_default: kybd-default-state {
> disable-pins {
> pins = "gpio102";
> @@ -801,13 +808,6 @@ qup0_i2c4_default: qup0-i2c4-default-state {
> drive-strength = <16>;
> };
>
> - qup2_i2c5_default: qup2-i2c5-default-state {
> - pins = "gpio81", "gpio82";
> - function = "qup21";
> - bias-disable;
> - drive-strength = <16>;
> - };
> -
> tpad_default: tpad-default-state {
> int-n-pins {
> pins = "gpio182";
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index 951cb1b6fcc4..929365cff555 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -827,7 +827,7 @@ uart17: serial@884000 {
> status = "disabled";
> };
>
> - qup2_i2c5: i2c@894000 {
> + i2c21: i2c@894000 {
> compatible = "qcom,geni-i2c";
> reg = <0 0x00894000 0 0x4000>;
> clock-names = "se";

\
 
 \ /
  Last update: 2022-12-15 13:53    [W:0.106 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site