Messages in this thread Patch in this message | | | From | Marijn Suijten <> | Subject | [PATCH 6/6] arm64: dts: qcom: msm8956-loire: Add SD Card Detect to SDC2 pin states | Date | Thu, 15 Dec 2022 00:20:49 +0100 |
| |
In addition to the SDC2 pins, set the SD Card Detect pin in a sane state to be used as an interrupt when an SD Card is slotted in or removed.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> --- .../dts/qcom/msm8956-sony-xperia-loire.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi index 2253fb05f1c9..a91b0af3e8c6 100644 --- a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi @@ -264,10 +264,27 @@ &sdhc_1 { status = "okay"; }; +&sdc2_off_state { + sd-cd-pins { + pins = "gpio100"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + &sdc2_on_state { clk-pins { drive-strength = <10>; }; + + sd-cd-pins { + pins = "gpio100"; + function = "gpio"; + drive-strength = <2>; + input-enable; + bias-pull-up; + }; }; &sdhc_2 { -- 2.39.0
| |