lkml.org 
[lkml]   [2022]   [Dec]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/3] arm64: dts: qcom: sm6115: Add USB SS qmp phy node
Date
Add USB superspeed qmp phy node to dtsi.
Make sure that the oneplus board dts (which includes the
sm4250.dtsi) continues to work as intended.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
.../boot/dts/qcom/sm4250-oneplus-billie2.dts | 3 ++
arch/arm64/boot/dts/qcom/sm6115.dtsi | 38 ++++++++++++++++++-
2 files changed, 39 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
index 3f39f25e0721e..4f0d65574448b 100644
--- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
+++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
@@ -232,6 +232,9 @@ &usb {
&usb_dwc3 {
maximum-speed = "high-speed";
dr_mode = "peripheral";
+
+ phys = <&usb_hsphy>;
+ phy-names = "usb2-phy";
};

&usb_hsphy {
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index e4ce135264f3d..15f311dcd289f 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -579,6 +579,40 @@ usb_hsphy: phy@1613000 {
status = "disabled";
};

+ usb_qmpphy: phy@1615000 {
+ compatible = "qcom,sm6115-qmp-usb3-phy";
+ reg = <0x01615000 0x200>;
+ clocks = <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+ <&gcc GCC_AHB2PHY_USB_CLK>;
+ clock-names = "com_aux",
+ "ref",
+ "cfg_ahb";
+ resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>,
+ <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>;
+ reset-names = "phy", "phy_phy";
+ status = "disabled";
+ #clock-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ usb_ssphy: phy@1615200 {
+ reg = <0x01615200 0x200>,
+ <0x01615400 0x200>,
+ <0x01615c00 0x400>,
+ <0x01615600 0x200>,
+ <0x01615800 0x200>,
+ <0x01615a00 0x100>;
+ #phy-cells = <0>;
+ #clock-cells = <1>;
+ clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+ clock-names = "pipe0";
+ clock-output-names = "usb3_phy_pipe_clk_src";
+ };
+ };
+
+
qfprom@1b40000 {
compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
reg = <0x01b40000 0x7000>;
@@ -1023,8 +1057,8 @@ usb_dwc3: usb@4e00000 {
compatible = "snps,dwc3";
reg = <0x04e00000 0xcd00>;
interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&usb_hsphy>;
- phy-names = "usb2-phy";
+ phys = <&usb_hsphy>, <&usb_ssphy>;
+ phy-names = "usb2-phy", "usb3-phy";
iommus = <&apps_smmu 0x120 0x0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
--
2.38.1
\
 
 \ /
  Last update: 2022-12-14 21:37    [W:0.042 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site