lkml.org 
[lkml]   [2022]   [Dec]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/1] i2c: designware: add pinctrl for recovery info as an option
Date
The current implementation of designware recovery mechanism fit for
specific device (Intel / Altera Cyclone V SOC) which have two separated
"wired" GPIOs to the i2c bus via the SOC FPGA for the i2c recovery.

This change add ability to get the pinctrl for the i2c recovery in order
to switch between pin configuration (I2C and GPIO functionality) if the
pinctrl exists.

Signed-off-by: Hanna Hawa <hhhawa@amazon.com>
---
drivers/i2c/busses/i2c-designware-master.c | 9 +++++++++
1 file changed, 9 insertions(+)

diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
index dc3c5a15a95b..478318b1d35f 100644
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -17,6 +17,7 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/module.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/reset.h>
@@ -832,6 +833,14 @@ static int i2c_dw_init_recovery_info(struct dw_i2c_dev *dev)
struct i2c_adapter *adap = &dev->adapter;
struct gpio_desc *gpio;

+ rinfo->pinctrl = devm_pinctrl_get(dev->dev);
+ if (IS_ERR(rinfo->pinctrl)) {
+ if (PTR_ERR(rinfo->pinctrl) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ rinfo->pinctrl = NULL;
+ dev_dbg(dev->dev, "can't get pinctrl for i2c recovery\n");
+ }
+
gpio = devm_gpiod_get_optional(dev->dev, "scl", GPIOD_OUT_HIGH);
if (IS_ERR_OR_NULL(gpio))
return PTR_ERR_OR_ZERO(gpio);
--
2.38.1
\
 
 \ /
  Last update: 2022-12-14 11:29    [W:0.044 / U:0.540 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site