lkml.org 
[lkml]   [2022]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/3] tty: serial: fsl_lpuart/imx: improve the TX break settings
Date
This patch set improve the TX break settings for lpuart and imx uart driver.
Add workaround patch for a LPUART IP bug about sending break signal.
Also disable the break in .shutdown() for lpuart and imx uart like other uart
drivers.

This patch set has been verified on imx8mm(imx uart) and imx8ulp(lpuart).

Sherry Sun (3):
tty: serial: fsl_lpuart: disable the CTS when send break signal
tty: serial: fsl_lpuart: disable the break condition when shutdown the
uart port
tty: serial: imx: disable the break condition when shutdown the uart
port

drivers/tty/serial/fsl_lpuart.c | 28 ++++++++++++++++++++++++----
drivers/tty/serial/imx.c | 3 ++-
2 files changed, 26 insertions(+), 5 deletions(-)

--
2.17.1

\
 
 \ /
  Last update: 2022-12-14 04:15    [W:0.383 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site