lkml.org 
[lkml]   [2022]   [Nov]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v2 2/4] arm64: dts: qcom: msm8916-samsung-j5-common: Add initial common device tree
On Wed, Sep 28, 2022 at 12:39:46PM +0000, Lin, Meng-Bo wrote:
> The smartphones below are using the MSM8916 SoC,
> which are released in 2015-2016:
>
> Samsung Galaxy J5 2015 (SM-J500*)
> Samsung Galaxy J5 2016 (SM-J510*)
> Samsung Galaxy J3 2016
> - SM-J3109/SM-J320Y/SM-J320YZ
> - SM-J320N0/SM-J320ZN
> - SM-J320P/SM-J320R4/SM-J320V/SM-S320VL
>
> Add a common device tree for with initial support for:
>

I'm afraid I don't think this, or the $subject, reflects what you're
actually doing in this change.

This should say something about moving the J5 device definition to a
common file, so that it could be reused in other related devices.

> - GPIO keys
> - SDHCI (internal and external storage)
> - USB Device Mode
> - UART (on USB connector via the SM5703 MUIC)
> - WCNSS (WiFi/BT)
> - Regulators
>
> The three devices (some varints of J3, all other variants of J5 released
> in 2015 and J5X released in 2016) are very similar, with some differences
> in display and GPIO pins. The common parts are shared in
> msm8916-samsung-j5-common.dtsi to reduce duplication.
>
> Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
> ---
> ...6-samsung-j5.dts => msm8916-samsung-j5-common.dtsi} | 10 ++--------
> 1 file changed, 2 insertions(+), 8 deletions(-)
> rename arch/arm64/boot/dts/qcom/{msm8916-samsung-j5.dts => msm8916-samsung-j5-common.dtsi} (94%)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi
> similarity index 94%
> rename from arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
> rename to arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi
> index eabeed18cfaa..4f71609bf6f8 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi

With this movewe have the Makefile referencing a file that doesn't
exist. Please introduce msm8916-samsung-j5.dts in the same commit.

> @@ -1,15 +1,10 @@
> // SPDX-License-Identifier: GPL-2.0-only
>
>
> -/dts-v1/;
> -
> #include "msm8916-pm8916.dtsi"
> +
> #include <dt-bindings/gpio/gpio.h>
>
>
> / {
> - model = "Samsung Galaxy J5 (2015)";
> - compatible = "samsung,j5", "qcom,msm8916";
> - chassis-type = "handset";
> -
> aliases {
> serial0 = &blsp1_uart2;
> };
> @@ -92,7 +87,6 @@ &usb {
>
>
> &usb_hs_phy {
> extcon = <&pm8916_usbin>;
> - qcom,init-seq = /bits/ 8 <0x1 0x19 0x2 0x0b>;
> };
>
>
> &smd_rpm_regulators {
> @@ -199,7 +193,7 @@ l18 {
> };
>
>
> &msmgpio {
> - gpio_keys_default: gpio-keys-default {
> + gpio_keys_default: gpio-keys-default-state {

This is a good, but unrelated change.

Thanks,
Bjorn

> pins = "gpio107", "gpio109";
> function = "gpio";
>
>
> --
>
> 2.30.2
>

\
 
 \ /
  Last update: 2022-11-06 03:57    [W:0.082 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site