lkml.org 
[lkml]   [2022]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] net: broadcom: Add PTP_1588_CLOCK_OPTIONAL dependency for BCMGENET under ARCH_BCM2835
From
On 11/29/22 03:58, Arnd Bergmann wrote:
> [Florian's broadcom.com address bounces, adding him to Cc
> with his gmail address]

Yes, because it's not a valid email address :) it's either lastname, or
first.lastname.

>
> On Tue, Nov 29, 2022, at 12:56, Arnd Bergmann wrote:
>> On Tue, Nov 29, 2022, at 04:18, Jakub Kicinski wrote:
>>> On Fri, 25 Nov 2022 19:50:03 +0800 YueHaibing wrote:
>>>> diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig
>>>> index 55dfdb34e37b..f4ca0c6c0f51 100644
>>>> --- a/drivers/net/ethernet/broadcom/Kconfig
>>>> +++ b/drivers/net/ethernet/broadcom/Kconfig
>>>> @@ -71,13 +71,14 @@ config BCM63XX_ENET
>>>> config BCMGENET
>>>> tristate "Broadcom GENET internal MAC support"
>>>> depends on HAS_IOMEM
>>>> + depends on PTP_1588_CLOCK_OPTIONAL || !ARCH_BCM2835
>>>> select MII
>>>> select PHYLIB
>>>> select FIXED_PHY
>>>> select BCM7XXX_PHY
>>>> select MDIO_BCM_UNIMAC
>>>> select DIMLIB
>>>> - select BROADCOM_PHY if (ARCH_BCM2835 && PTP_1588_CLOCK_OPTIONAL)
>>>> + select BROADCOM_PHY if ARCH_BCM2835
>>>> help
>>>> This driver supports the built-in Ethernet MACs found in the
>>>> Broadcom BCM7xxx Set Top Box family chipset.
>>>
>>> What's the code path that leads to the failure? I want to double check
>>> that the driver is handling the PTP registration return codes correctly.
>>> IIUC this is a source of misunderstandings in the PTP API.
>>>
>>> Richard, here's the original report:
>>> https://lore.kernel.org/all/CA+G9fYvKfbJHcMZtybf_0Ru3+6fKPg9HwWTOhdCLrOBXMaeG1A@mail.gmail.com
>>
>> The original report was for a different bug that resulted in the
>> BROADCOM_PHY driver not being selectable at all.
>>
>> The remaining problem here is this configuration:
>>
>> CONFIG_ARM=y
>> CONFIG_BCM2835=y
>> CONFIG_BCMGENET=y
>> CONFIG_PTP_1588_CLOCK=m
>> CONFIG_PTP_1588_CLOCK_OPTIONAL=m
>> CONFIG_BROADCOM_PHY=m
>>
>> In this case, BCMGENET should 'select BROADCOM_PHY' to make the
>> driver work correctly, but fails to do this because of the
>> dependency. During early boot, this means it cannot access the
>> PHY because that is in a loadable module, despite commit
>> 99addbe31f55 ("net: broadcom: Select BROADCOM_PHY for BCMGENET")
>> trying to ensure that it could.

I don't believe this is the failure mechanism because there is always a
fallback to the Generic PHY driver, the issue is that we have configured
a specific RGMII mode in the Device Tree that is acted on by both the
Ethernet MAC and the PHY in a way that is electrically incompatible
unless the proper PHY driver is also enabled such that the RGMII mode is
enabled on the PHY side.
--
Florian

\
 
 \ /
  Last update: 2022-11-29 20:13    [W:0.031 / U:0.756 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site