lkml.org 
[lkml]   [2022]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] power: supply: bq256xx: Remove init ichg/vbat with max value
Hi,

On Tue, Nov 29, 2022 at 05:01:12PM +0800, Hermes Zhang wrote:
> Init the ichg and vbat reg with max value is not good. First the chip
> already has a default value for ichg and vbat (small value). Init these
> two reg with max value will result an unsafe case (e.g. battery is over
> charging in a hot environment) if no user space change them later.
>
> Signed-off-by: Hermes Zhang <chenhuiz@axis.com>
> ---

It's the driver's task to setup safe initial maximum values.
Pre-kernel values may or may not be safe if you consider things
like kexec. If you get unsafe values programmed, then fix the
values instead.

-- Sebastian

> drivers/power/supply/bq256xx_charger.c | 10 ----------
> 1 file changed, 10 deletions(-)
>
> diff --git a/drivers/power/supply/bq256xx_charger.c b/drivers/power/supply/bq256xx_charger.c
> index 01ad84fd147c..d1aa92c10c22 100644
> --- a/drivers/power/supply/bq256xx_charger.c
> +++ b/drivers/power/supply/bq256xx_charger.c
> @@ -1562,21 +1562,11 @@ static int bq256xx_hw_init(struct bq256xx_device *bq)
> if (ret)
> return ret;
>
> - ret = bq->chip_info->bq256xx_set_ichg(bq,
> - bat_info->constant_charge_current_max_ua);
> - if (ret)
> - return ret;
> -
> ret = bq->chip_info->bq256xx_set_iprechg(bq,
> bat_info->precharge_current_ua);
> if (ret)
> return ret;
>
> - ret = bq->chip_info->bq256xx_set_vbatreg(bq,
> - bat_info->constant_charge_voltage_max_uv);
> - if (ret)
> - return ret;
> -
> ret = bq->chip_info->bq256xx_set_iterm(bq,
> bat_info->charge_term_current_ua);
> if (ret)
> --
> 2.30.2
>
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2022-11-29 16:28    [W:0.041 / U:1.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site