lkml.org 
[lkml]   [2022]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] ARM: dts: sun8i: nanopi-duo2: Fix regulator GPIO reference
On Fri, 25 Nov 2022 13:54:01 -0600
Samuel Holland <samuel@sholland.org> wrote:

> The property named in the schema is 'enable-gpios', not 'enable-gpio'.
> This makes no difference at runtime, because the regulator is marked as
> always-on, but it breaks validation.
>
> Fixes: 4701fc6e5dd9 ("ARM: dts: sun8i: add FriendlyARM NanoPi Duo2")
> Signed-off-by: Samuel Holland <samuel@sholland.org>

Reviewed-by: Andre Przywara <andre.przywara@arm.com>

Cheers,
Andre

> ---
>
> arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
> index 43641cb82398..343b02b97155 100644
> --- a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
> +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
> @@ -57,7 +57,7 @@ reg_vdd_cpux: vdd-cpux-regulator {
> regulator-ramp-delay = <50>; /* 4ms */
>
> enable-active-high;
> - enable-gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
> + enable-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
> gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
> gpios-states = <0x1>;
> states = <1100000 0>, <1300000 1>;

\
 
 \ /
  Last update: 2022-11-25 22:45    [W:0.028 / U:0.900 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site